yes, I ran it on Linux last semester, although I don't know how. I just ran
a tulip-diag from beowulf.org and it says it's not been assigned a valid
IRQ, and it must be fixed in PCI BIOS setup.??
----- Original Message -----
From: tom carlile <[EMAIL PROTECTED]>
To: SigLinux <[EMAIL PROTECTED]>
Sent: Thursday, April 20, 2000 5:28 PM
Subject: Re: eth0
>
> looks to me like the driver for that card isn't being loaded
> correctly, isn't being fed the right parameters or is the wrong
> driver. make sure you've specified the right driver in the
> kernel config, or that you're using the right module.
>
> last semester did you run Linux and this card together?
>
> On Thu, 20 Apr 2000, "Frank Phillips" wrote:
> > Date: Thu, 20 Apr 2000 14:54:02 -0500
> > To: "siglinux" <[EMAIL PROTECTED]>
> > From: "Frank Phillips" <[EMAIL PROTECTED]>
> > Reply-To: "Frank Phillips" <[EMAIL PROTECTED]>
> > Subject: eth0
> >
> >
> > Hey, I need some help with eth0. I have a Netgear FA310TX and RH6.1.
Boot-time messages say
> > eth0:unknown interface:No such device
> >
> > "eth0" isn't in /proc/devices, /proc/interrupts, or /dev. It is
in /proc/net/dev,
> > however.
> >
> > ifconfig eth0 up yields SIOCSIFFLAGS:Resource temporarily
unavailable
> >
> > And when I run ./MAKEDEV -v eth0 it says ./MAKEDEV:Don't know how to
make device "eth0"
> >
> > This is the beginning of the output from ./MAKEDEV -v update :
> >
> > ./MAKEDEV: don't know what "pty" is
> > ./MAKEDEV: don't know what "ttyS" is
> > ./MAKEDEV: don't know what "misc" is
> > ./MAKEDEV: don't know what "fb" is
> > ./MAKEDEV: don't know what "netlink" is
> > ./MAKEDEV: don't know what "ptm" is
> > ./MAKEDEV: don't know what "pts" is
> > ./MAKEDEV: don't know what "raw" is
> > ./MAKEDEV: don't know what "ramdisk" is
> >
> > I know the card works, because I had it working for a short while last
semester before I
> > reinstalled. Linux would really rather be on the net.
> >
> > Thanks,
> > Frank Phillips
> >
> >
> --
> tom carlile [EMAIL PROTECTED]
> professional systems wrangler http://sacrilege.org
> --------------------------------------------------------------------------
-
> Send administrative requests to [EMAIL PROTECTED]
---------------------------------------------------------------------------
Send administrative requests to [EMAIL PROTECTED]
