My test file is raw 8-bit analog data, with values ranging from 0 to
255. The device I will eventually be building will have an 8-bit ADC.
DaveW
> Is the PulseView "Import analog signals without header" function working
> properly?
> When I import a test file consisting of 32 8-bit values ranging from
> 0x00 to 0xFF in increments of 0x08, I expect to see a ramping signal,
> but instead I see a mix of mostly sawtooth and vertical lines.
> I've tried formats S8 and U8, various vertical resolutions, etc.
> I'm using PulseView 0.4.0-git-56853c9 (debug build) on Windows 7 64-bit.
> DaveW
That one is for *raw* data, are you sure yours is not actually text?
Kind regards,
Stefan
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
