Hi David, while we certainly do appreciate the bug reports, we'd prefer if you could file them with our bug tracking system at
http://sigrok.org/bugzilla/ This way, we can track it better. All the best, -Soeren On Fri, 2017-05-26 at 12:48 -0700, David C. Wiens wrote: > PulseView is not always graphing the last analog sample. > > To reproduce the problem: > 1) start PulseView, select the Demo device, 100 samples, 1 > kHz, click Run > 2) note that the analog graph line ends at 99 msec., the digital > at > 100 msec. -- this is OK and expected > 3) save into a session file, then re-open the session file > 4) note that the analog graph line now ends at 98 msec. because > the > last sample is not shown > > DaveW > > ------------------------------------------------------------------- > ----------- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > sigrok-devel mailing list > sigrok-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sigrok-devel ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
