I am using saleae logic clone with driver fx2lafw and OS Fedora 30
PulseView version 0.4.1 is installed using Fedora packager.I could
"select device " and run session as designed.
Then I installed PulseView using AppImage version 0.5.0-git-
66ab3d7.Using this version, I cannot select device - there is no
response.
So the way around is to create a session with the selected
device using version 0.4.1 and then run PulseView 0.5.0and select
device from the drop-down box.
On Tue, 2019-10-01 at 20:37 +1000, A/Prof Chris Andrews wrote:
> I have a 15" MACBOOK PRO.
>
> I am using the LHT00SU1 Oscilloscope and Logic Analyzer connect
> via USB.
>
> This is a no-name brand, and is a clone of the CWAV USBee AX-PRO.
>
> The general advice is that it is used with Pulseview, using the
> driver fx2lafw.
>
> I have downloaded Pulseview and am setting it up. It loads well,
> and runs, however when I come to "select device" I select
> fx2lafw
> as the driver and then ask to scan USB ports for my device.
> There
> is no response from the scan for anything such as CWAV, USBee,
> AX-Pro, or the like, or any generic response.
>
> Does anyone have any experience with setting up this device or a
> CWAV device with Pulseview?
>
> cjabar
>
>
>
>
>
>
>
>
>
> _______________________________________________sigrok-devel mailing
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sigrok-devel
_______________________________________________
sigrok-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
