Hello,
You need the firmware for the Cypress IC inside your device.
Take a look at this wiki page:
https://sigrok.org/wiki/Mcupro_Logic16_clone
In the above page there is a link to pre built binaries
Additional information on the firmware itself:
https://sigrok.org/wiki/Fx2lafw
Best Regards
On 2020-01-05 16:08, Dmitry Katsubo via sigrok-devel wrote:
Dear Sigrok develoeprs,
I would like to use latest PulseView v0.4.1 with this Saleae Logic 16
clone [1] (looks exactly the same as "black" mod on page Noname
XL-LOGIC16-100M [2]).
I have downloaded drivers from Saleae website [3] and installed them.
After that when I select "Saleae Logic 16" from driver list and press
"Scan for devices", PulseViewis is able to detect Saleae Logic16:
Unfortunately when I press OK, it shows the error "Failed to open
device. generic/unspecified error":
Is there any chance to make it working?
Thanks in advance!
--
With best regards,
Dmitry
Links:
------
[1] https://www.aliexpress.com/item/32613420798.html?
[2] https://sigrok.org/wiki/Noname_XL-LOGIC16-100M
[3]
https://downloads.saleae.com/logic/1.2.29/Logic+1.2.29+Win+64+Standalone.zip
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
--
Federico Cerutti
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
