Hello, On 2020-01-06 23:10, Federico Cerutti wrote: > Hi, > According to the wiki > https://sigrok.org/wiki/Firmware#Windows > you should put the firmware in the following path > C:\Program Files (x86)\sigrok\PulseView\share\sigrok-firmware > and pulseview will deal with uploading it to the device at the right > time. At the same time the wiki also says that the file should be > already there, as it it a redistributable package.
I have checked that directory and I see that the file fx2lafw-saleae-logic.fw (8120 bytes) is there. Is it the right one? > Check first if it already in place, then I honestly don't know what > could be wrong. The only other time I had that error message was when > I was missing the firmware, but being on Arch linux I simply grabbed > the right aur package and pacman dealt with the issue for me :-) > > I can't help you about the Logic issue either, since I've never used > the two tools in conjunction, only one OR the other. > You could have a look at pulseview/libsigrok code to check how it > expects the csv data to be. > > Sorry for the mostly unhelpful reply, > Federico No worries. Maybe PulseView can be run in verbose mode so that it generates more detailed log? Or maybe message could be further improved / extended to bring more light on the issue? (e.g. "Firmware was not found", "Failed to upload firmware", etc). P.S. I have checked that device works properly (I was able to make a capture) with Saleae software. By looking at LED blinking I also see that it uploads its firmware successfully at startup. I tried also to launch PulseView after exiting Saleae (so that device is still initialized with a firmware) but it didn't help. -- With best regards, Dmitry _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
