I've often wondered about this. One way to tackle it would be to sample a fast-changing signal with a probe from both analysers, then align that channel to be the same in both.
This would probably allow a crude synchronisation but I have no idea how well interpolation for other edges, and adjustment for differential clock tick would work. Ideally you'd use a single fast clock that is significantly faster than anything in the target but that would be expensive. On Sun, Aug 9, 2020 at 12:15 PM David Slipper <softf...@hotmail.com> wrote: > > The other day I found myself in need of looking at an 18 wire bus. > > Now I have a 16bit and an 8bit LA and I wondered if there was a way to > sample/record from both at the same time ?? > > As it happened I found that two of the signals could be safely ignored > but even so it struck me as a useful possibility. > > I realise there may be problems and limitations with this but I wondered > if it might be possible ?? > > Best regards, > Dave > > > > > _______________________________________________ > sigrok-devel mailing list > sigrok-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sigrok-devel >
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
