Right .. I plan on running it on a windows box and grab wireshark of the
USB.

On Tue, Jan 31, 2023, 13:53 Gerhard Sittig <gerhard.sit...@gmx.net> wrote:

> On Mon, 2023-01-30 at 18:52 -0500, John D'Ausilio wrote:
> >
> > Well, there's good news and bad news ;)
> >
> > The bitstream upload is successful, but the run state is bad :
> > sr: [00:00.050178] kingst-la2016: Uploading FPGA bitstream
> > 'kingst-la1010a2-fpga.bitstream'.
> > sr: [00:00.050382] resource: Opened
> > '/home/john/.local/share/sigrok-firmware/kingst-la1010a2-fpga.bitstream'.
> > sr: [00:01.235831] kingst-la2016: FPGA bitstream upload (343172 bytes)
> done.
> > sr: [00:01.308258] kingst-la2016: Run state: 0x00e1 (idle).
> > sr: [00:01.309024] kingst-la2016: Unexpected run state, want 0x85eX, got
> > 0x00e1.
> > sr: [00:01.309852] kingst-la2016: Device should be initialized.
> > sr: [00:01.310694] hwdriver: Scan found 1 devices (kingst-la2016).
> > The following devices were found:
> > sr: [00:01.311777] hwdriver: sr_config_get(): key 20000 (conn) sdi
> > 0x5560019180 cg NULL -> '1.11'
> > kingst-la2016:conn=1.11 - Kingst LA1010 with 18 channels: CH0 CH1 CH2 CH3
> > CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 PWM1 PWM2
> > sr: [00:01.312619] hwdriver: Cleaning up all drivers.
> >
> > It does plow past the error and brings up a reasonable looking display in
> > pulseview, but has problems starting acquisition ..
>
> The above log looks good to me. There is just the unexpected run
> state, but that's not fatal, just a warning. The check for those
> bits is an arbitrary choice anyway, could not tell how certain
> that expectation even is, or whether the first supported devices
> just happened to always come up with this bit pattern, while none
> of it is essential. Check the git history if you are interested
> in the evolution of that driver and the set of supported devices.
>
> The above log stops after the detection, does not include the
> start of an acquisition. The other log in the other message says
> "no device" when trying to configure an acquisition. Which could
> have a different cause than speaking the wrong protocol (like
> cable/connection issue, device unplugged, power outage, etc). So
> that needs verification (re-execution after cable and port
> checks, checks for power drops, etc).
>
>
> virtually yours
> Gerhard Sittig
> --
>      If you don't understand or are scared by any of the above
>              ask your parents or an adult to help you.
>
>
> _______________________________________________
> sigrok-devel mailing list
> sigrok-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/sigrok-devel
>
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel

Reply via email to