If you are going to buy a low voltage machine THAT simple, why not go to radio shack, buy 3 9v radio batteries, 3 clips, wire them up positive to negative (In series) to produce 27 volts, and run the negative to one piece of silver, and the positive to the other piece of silver. total cost= about $7.00 and an extra 15 dollars for 10 feet of .999 18 ga silver wire from: http://www.metalworks.com/Orderinfo.htm Total cost: under 20 bucks...
A High voltage AC maker can be made using a used Neon sign transformer. Let me give you an idea of the way that I generate CS. For years I used the 9v battery method. I have now found that a used neon sign ballast (9000v) or (12,000v) that you should be able to pick up from a sign shop for about 20 dollars, and a couple of pure silver wires, and a couple of alligator clips is really all you need to make high quality, high voltage AC Silver Colloid. It can all be done for under $40.00. If you insist on a new ballast, it can cost you over $100.00. Just submerge one silver wire in the water, and suspend the tip of the other electrode about 1/8 inch above the surface of distilled water. When you turn on the ballast,you will get a momentary blue arc, and then a "cone" of water will be drawn up the tip of the electrode about 3/8-1/2 inch. Leave this for about an 1/2 hour in 1/2 gallon of distilled water. If it starts to arc before the 1/2 hour, and you let it arc for a while, then the colloid starts to get a cloudy, milky appearance. Even though this "milky" product still appears to be stable, (no dropout,or yellowing) I am not sure of what particle size is being made during the arcing process, so I do not let it arc, Maybe someone else on this list will know what size that type of particle is. I don't. I also don't know the concentration that it makes, nor how to test at home for concentration. I do think it is somewhere in the neighborhood of about 5-10ppm. I do know that by not letting it arc, I am making a perfectly acceptable product to me, which seems to be vastly superior to the old 9v battery process. It also seems to utilize the silver electrode much more efficiently. It is obviously much more stable and exhibits a strong Tyndal effect, and does not seem to "drop out" or get more and more yellow upon sitting. ( I think yellowing and dropout are a sign of larger particles) If you are interested in making your own CS, you may find that this simple arrangement can make a yellowish product that compares much more favorably to the product produced by the high quality 10,000v AC machines you may have heard about on the internet selling for over $700, than does the product produced by the 30volt DC (9v battery process) John -----Original Message----- From: G Murray <[email protected]> To: [email protected] <[email protected]> Date: Sunday, December 13, 1998 1:42 PM Subject: Re: CS>Url problems >How many people have bought and tried the "Small Wonder" colloidal >silver maker at this Beck site. I would like any personal info on this >product as I can find. > >Glenda > > >http://www.rarebooks.net/beck/Colloidal%20Silver%20Maker.htm > > >-- >The silver-list is a moderated forum for discussion of colloidal silver. > >To join or quit silver-list or silver-digest send an e-mail message to: >[email protected] -or- [email protected] >with the word subscribe or unsubscribe in the SUBJECT line. > >To post, address your message to: [email protected] > >List maintainer: Mike Devour <[email protected]> -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>
