tj garland wrote: > > About 30 days ago we began to smell an odor in the newly remodeled bathroom. > It was finally traced to a very small black growth on the floor tile grout > beside the new commode. The commode doesn't leak BTW. We have tried to kill > it with various store bought cleaners and disinfectants. We then tried > 100ppm CS, Mule team Borax, and now 35% H2O2. The H2O2 seems to be working, > however the odor (mold?) is spreading to other grout lines- like it was > trying to escape the peroxide. First -what is it? Second- is there a R/B > frequency that will kill it? I've pored through my frequency lists to no > avail. Could I pour water ( or CS) on the floor and zap it with a HFA4? > What frequency? We think that it may be causing respiratory problems. > HELP!!! Jolly
Jolly, HuldaClark lists several frequencies for Molds, from 77KHz up to 288KHz; Using the flat stainless steel plates (and the FHA-4), placed on oposite sides of the area, dampened with CS solution, should be well worth trying. The 4 foot leads on each pad allow reaching across 8 feet; you can extend the leads if necessary. Use one pad in a black jack, one in a red jack; power it with thw 15 volt Wall Wart transformer, and turn the output power control to High. You might try starting at around the 77KHz, and adjust the frequency up every 5 minutes or so by about 10KHz, unless you can come up with a specific name for the mold that matches Hulda's List. Be Well! Bruce http://web.idirect.com/~showcase/althealth -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>
