Michael C McNeill wrote:

> Ok, I got all the parts put together.  As soon as I inserted the
> second
> wire into the water, one began sending off little bubbles and the
> other
> started sending out a milky-white cloud that seems to be falling to
> the
> bottom of the container.

Do not use tap water!!!!!!!

It reacts with the CS & forms insoluabe compounds!

Use only pure distilled water. Even some labeled as that is not pure;
have some 'Sure Fine' from a Safeway store, bottled in Texas, that tests
17PPM of something = contamination...

visit  http://web.idirect.com/~showcase/althealth/csilver.htm

for further info, please.

My tap water (from a good well in the mountainsa of CO) has 217PPM
normally of Total Disolved Solids; any silver you try to make will react
with anything else in the water until it is all tied up in these
compounds...


>  Here's my makeshift rig:
>
>         4x 9v batteries
>         2 alligator clips, one on each end of the battery "stack"
>         2 silver wires dunked in the water
>
> the water is "tap" water, coming thru our water filter, unheated.  the
>
> wires are suspended in the water by cluthespins (no silver touching
> the
> glass).  Is it sposed to start a reaction *that* fast?

Without current limiting, you will not be producing what you want...
please visit the page above. Hope thi info there helps.

Bruce



--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the subject: line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>