Hi Michael, At 01:08 PM 5/9/98 EDT, you wrote: >Ok, I got all the parts put together. As soon as I inserted the second >wire into the water, one began sending off little bubbles and the other >started sending out a milky-white cloud that seems to be falling to the >bottom of the container. Here's my makeshift rig:
I also get this when I use water from our well on the farm. There are probably more than 100 ppm worth of minerals etc. in the water. I agree with Mike and Daniel to only use steam distilled water. Even deionized water is not good enough in my experience. I currently use distilled and deionized water with a conductivity of less than 10 Megaohm per cm. - very low. (Lab tested) But I feel that good distilled water is perfect. > 4x 9v batteries > 2 alligator clips, one on each end of the battery "stack" > 2 silver wires dunked in the water I use 3x 9v batteries (pm9, bigger than the small ones that are found in transistor radios and walkie talkies etc.) They last a bit longer and seem to be more immune to accidental short-outs. >the water is "tap" water, coming thru our water filter, unheated. the >wires are suspended in the water by cluthespins (no silver touching the >glass). Is it sposed to start a reaction *that* fast? My reaction in heated water only starts after about an hour (8 milliamp). But I make one liter at a time and would therefore be slower than a 250 ml batch. I include a post from Robert Sandberg that helped me when I started out making CS. Here it is. I hope it helps. Regards, Christian Resent-Date: Sat, 14 Mar 1998 00:15:30 -0800 (PST) Date: Sat, 14 Mar 1998 00:14:48 -0800 From: Robert Preston Sandberg <[email protected]> Organization: Alii Management Trust X-Mailer: Mozilla 2.01 (Win95; U) To: [email protected] Subject: Re: Help me build CS generator - Please Resent-From: [email protected] Reply-To: [email protected] X-Mailing-List: <[email protected]> archive/latest/1625 X-Loop: [email protected] Resent-Sender: [email protected] Hello, I have been involved with selling and making CS for 6 years and lately have been making and selling a few devices to make the stuff as well as the Dr. Beck blood electrifiers. I thought the letter I gave given to a few people to get them started in making and using CS might help you. What it does not say is that you need a source of pure DC current at 24 to 40 volts. The units I sell use 120 volts AC and convert it to 30 volts of ripple free DC current. Colloidal silver does not like ripple in the DC current. You could get the job done just as well with 2 or 3 automobile batteries hooked up in series. For what it is worth, here is the letter. Good luck: Dear Friend, In this letter I will attempt to tell you some of the potential ways you can use the devices Dr. Bob Beck has designed. Of course, this is all very theoretical. I can speak of these things only as one researcher sharing ideas with another since no one can legally make any pronouncements of advice for anyone else's health unless they have been licensed by the government for that purpose. It is also common knowledge that everyone is different. Therefore, everyone will get somewhat different results when they apply these things to their health. The first thing I would like to tell you is what I have found to be the easiest way to produce high quality colloidal silver. This method is very simple and has worked every time. I have never had a failed batch. Very few people can claim that. The first thing is to start with 999 fine (99.9% pure) silver. You can use silver rounds or silver wire. You can use silver of higher purity such as 9999 fine (or 99.99% pure) if you wish, but that is not necessary. The next thing you need is distilled water. In an emergency you can use tap water but it is not recommended as the size of the silver particles will be larger and it will react with the impurities in the water and settle out. It must, therefore, be consumed immediately. The same thing will occur if you put salt in the water to speed up the process. No one who really knows what they are doing would use anything but pure distilled water. It may take a little longer but the results are worth it. Take a glass coffee maker pot (pick up at D.I. or Goodwill for about $5) or similar heat resistant glass container and put the distilled water into it. Make sure the pot is very clean. Rinse it out with distilled water. Fill it to the desired level with distilled water. Place the pot on the stove and bring to a rolling boil. When it reaches a rolling boil, turn the burner down until the water is bubbling at the bottom of the pot but not at the top. That will cause the water to stir in the pot which makes the process work faster and better. Put the silver into the water so that the alligator clips are not in the water. Put the silver electrodes somewhere between 1/2" and 1" apart. The closer together they are, the faster the process will go. However, if they are too close together, especially if the water is not being stirred, crystals of silver will bridge the gap between electrodes and short the power supply out. That will not hurt the power supply but it will stop the process of making colloidal silver. Plug the unit in and watch the show. You will see the water change gradually to a pale yellow then get progressively darker as time passes. How dark you let it get is a matter of personal choice. The longer you let it go the darker it will get until it turns a soupy brown color. You can stop it at any time. Store colloidal silver in clean containers. Use glass containers if at all possible. Colloidal silver will tend to plate out on the walls of most plastic containers. It will plate out on glass containers too but not nearly to the degree that it does with plastic. If at all possible, store it in dark glass bottles or in a dark place. Silver is light sensitive. Colloidal silver is degraded by light. You also want to avoid letting your colloidal silver suspension freeze. Freezing will cause the colloidal silver to settle out all or in part. Freezing might also cause it to break the containers. If you make a concentrated suspension of colloidal silver, you can dilute it with distilled water. A few quarts can be diluted to make many gallons of beautiful golden colloidal silver. Colloidal silver stores better if it is not too concentrated. If storage space is not a problem, I would dilute most of my batch for daily use. I would save a small part of it in very concentrated form for use while traveling. I would also suggest a way of dealing with major epidemics of airborne infections. When it becomes obvious that "something is in the air," immediately put a drop of colloidal silver in each eye. Snort some colloidal silver up each nostril or hang upside down and put a few drops into each nostril. Drink as much of it as you feel prompted to. Remember, you will never be able to cause a toxic reaction with true colloidal silver. Also put colloidal silver into any open wounds. A really great thing to have would be a cool-mist humidifier. The kind that uses ultrasonic sound to blast the water into small droplets and blows them into the room air. Fill it with colloidal silver and breathe some of that mist. It will result in colloidal silver getting deep into the lungs. No bacteria or virus can live in an environment with colloidal silver present. At the same time, put the blood electrifier on your wrist and begin "zapping" your blood. I have heard stories of people killing off the flu or a cold in 20 minutes to two hours using that method. You create a condition where there is nowhere in your body that the germs can live or grow. The colloidal silver kills any germs in your eyes, nose, sinuses, throat, lungs and esophagus. The "zapping" kills anything that gets as far as the blood. Problem solved! Colloidal silver can be used as a great deodorant after your bath or shower. It can also be used as a general disinfectant but remember, if it goes down the drain it will kill the bacteria in your septic tank or sewer. That is not a good idea. We need bacteria to break down the crud in sewage and killing that bacteria causes major problems for a septic tank or for a sewage treatment plant. With respect to the electrodes for the blood electrifier, I would say that the ones I have included are good enough to get you started but they will wear out and you will need something more durable. I have not yet found a really good source for ready made electrodes that are satisfactory for long term use. I am working on that right now and will let you know when we have a really good solution. Washing your wrist with soap and water increases the skin conductivity and prolongs the effectiveness of the adhesive. I would recommend trimming the electrodes so they are about 0.5" wide and about 1.75" long. That will give you a good contact with the skin over the arteries without spreading the electrical charge so wide that much of it is wasted in the skin rather than going into the blood in the arteries. Dr. Beck recommends that the electrodes be even narrower. See the paragraph below on making your own electrodes. The electrodes I have thrown in are good for about 8-10 uses and then the electrically conductive adhesive will lose its stickiness and will dry out and lose its conductivity. You can rejuvenate its conductivity by soaking them in water with a little salt (sea salt is preferred) before you use them. They will not get sticky again but they will regain their conductivity. You will have to use an ace bandage or similar method to hold them on the pulse points. If you wish to purchase more of the same sort of electrodes, go to any medical supply house and ask for "repositionable TENS electrodes." Repositionable means that they can be reused severable times. You can use either the pre-wired or the pin-style electrodes. You can make electrodes that can be reused indefinitely by going to the local welding shop and getting a piece of 3/32" diameter number 316 stainless steel rod. (If you cannot find such a rod go to the local junk yard and get a stainless steel radio antenna. It should work just fine.) Cut off a couple of 1.5" long pieces and affix alligator clips to one end of each piece. Wrap the other end with a strip of cotton flannel and tie the flannel onto the little rods with thread wrapped helically around the flannel. Dip the flannel in salt water, hold them in place over the pulse points with elastic and grab the tips of the wires from the zapper with the alligator clips. This is the method that Dr. Bob Beck recommends in his paper. To fully implement the Dr. Bob Beck program you need to procure and use a magnetic pulse generator. This is necessary to clear the body tissues of any remaining sources of infection or parasites. This will prevent you from reinfecting your newly cleansed blood with crappy critters from your body tissues. You also will be well advised to drink a lot of water during the initial stages of cleansing your body so you will be able to more rapidly flush the toxic debris from the dead germs out of your system. Drinking ozonated water will dramatically enhance this process and do other good things for your body as well. Most of the toxic substances you will want to rid your body of are acid in nature. Eating an alkaline diet will help in the cleansing process. This means eating lots of fresh fruits and fresh or lightly steamed vegetables. Potatoes are also alkaline in nature. Meats, dairy products, and most grains are acid in nature and should be eaten sparingly during any major cleansing project. However, I want to make it clear that the Dr. Bob Beck procedure will work regardless of diet. When I first knew Dr. Bob Beck, he was a garbage-gut with many vices. His methods worked in spite of all that. These suggestions on diet are my own observations on ways to further enhance the process. Best wishes, Robert Sandberg General Delivery Kooskia, Idaho, U.S.A. [83539] 208-926-7932 208-983-0567 (messages) [email protected] -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the subject: line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>

