----- Original Message ----- From: RONjb <[email protected]> Great stuff Ron, Shall be giving this a go.
Ivan. > I measured the ma with the HVDC setup. Shorted it put out 9ma. In > the CS cell using DW it started at 4ma and quickly went to 8ma. My > guess is that the lowest possible amps makes the most effective CS. > By putting the spark-plug in series with the electrodes in the HVAC > setup the amps where effectivly zero and the volts across the unit > terminals was 1200 volts but at the same time across the electrodes > read 150 volts. It is interesting that although the starting DW is > almost nonconductive the voltage still was able to pass through the > cell and jump the air gap of th spark-plug. It looks like > electrostatics would make effective CS? > > -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>
