Hi Ken. Years ago I computed the total sq inch of coins and bars. For coins I came up with 4.75 total sq inches, thats front and back and edges. I forget the formula I used and some people say say you should only use the facing sides when using only two coins. I used 4 silver bars with a hole drilled in the top and a piece of 99.9% silver wire to hang the bars with. Spacing was 1 inch apart and mA was set at 10. Used a 1 gal sun tea jar. This set up would produce 1 quart per hour. Also used a aqu.pump for stirring. I also used polarity switching. PPM was around 20 then would drop to about 13 in 24 hrs. Worked great but I'm overseas now and use a much smaller setup. Hope that helps.
Sam L On Jan 10, 2008 2:54 AM, KENNETH TUURI <[email protected]> wrote: > Hi everyone I'm Ken. > > I'm new to the list but not new to Colloidal silver. I was making it a few > years back, but have not for a while and been out of touch a little. > When I was making it I was using a 9volt wallwart, distilled water, > silver rods, + aqu.pump. > Silver rods were worn out so I just picked up 2 Canadian Maple leaf coins > .9999 pure silver. > > In the past I always had some colloidal silver around to use a little when > starting a new batch, but I don't have any now. So last night I made a > batch, I ran it for about 3 hrs.Will this batch be a little weaker because > I didn't have any CS to start it with? My thinking is I can use this batch > as a starter? > > Trying to get up to date on things. I see they have a whole lot of CS > generators on the market now. > I understand from what I have read lately is that the prefered voltage to > use is 30 volts. A friend who I will be making some for as well, is an > Electronics Tech. and has offered (no cost) to build me a new constant > current CS generator. > > So my question is; at 30 volts what should the current (constant current) > be?? > Also using this generator, how long will the process take? Is it less time > with the higher volts? > I will be using distilled water, silver coins .9999 pure, + aqu.pump in a > 14oz glass ( but I would like to use a 48qz mason jar I have). I would like > to do the best job I can within budget. > > Looking for a little guidance from other members. Been reading alot of > your emails on the list in the last few weeks and thought it was time I > started adding to the overflow of email in my inbox lol. :) > > Just like to add that when I was using it before. One of the things I > used it for was very oily skin and would soak a few cotton pads with CS and > apply it to my face in some areas and just let the pad soak there for qiute > a while, sometimes till they became dry. I did this for a few years with NO > sign of grey or blue. Thought I would mention this as there has been alot > of talk lately about Paul (aka the blue man) > > Just like to add a Happy + Heathly New Year to all. > > Thanks > Ken > -- A government big enough to give you everything you want is big enough to take everything you have. Google Ron Paul
