Thank you Ode
I was always told to keep the electrodes about an inch apart. But I was not
aware how distance would make a difference in current, I can understand it
now. Thanks
Ken
----- Original Message -----
From: Ode Coyote <[email protected]>
Date: Thursday, January 10, 2008 12:02 pm
Subject: Re: CS>Help! New to the list!
To: [email protected]
>
>
> The voltage is almost irrelevant.
> The current should be *around* 1 milliamp per square inch of
> electrode or
> less to avoid overloading the Nernst Diffusion layer.
> Distance between electrodes as well as area will regulate
> current by adding
> or decreasing resistance in the water.
> That can also be done with a potentiometer.
> You'll find that as current is held constant, voltage
> will go down as
> water conductivity goes up with the addition of silver ions.
>
>
> Ode
>
> At 09:54 PM 1/9/2008 -0800, you wrote:
> >Hi everyone I'm Ken.
> >
> >I'm new to the list but not new to Colloidal silver. I was
> making it a few
> >years back, but have not for a while and been out of touch a little.
> > When I was making it I was using a 9volt wallwart,
> distilled water,
> > silver rods, + aqu.pump.
> >Silver rods were worn out so I just picked up 2 Canadian
> Maple leaf coins
> >.9999 pure silver.
> >
> >In the past I always had some colloidal silver around to use a
> little when
> >starting a new batch, but I don't have any now. So last night I
> made a
> >batch, I ran it for about 3 hrs.Will this batch be a little
> weaker because
> >I didn't have any CS to start it with? My thinking is I can use
> this batch
> >as a starter?
> >
> > Trying to get up to date on things. I see they have a
> whole lot of CS
> > generators on the market now.
> >I understand from what I have read lately is that the prefered
> voltage to
> >use is 30 volts. A friend who I will be making some for as
> well, is an
> >Electronics Tech. and has offered (no cost) to build me a new
> constant
> >current CS generator.
> >
> > So my question is; at 30 volts what should the current
> (constant
> > current) be??
> >Also using this generator, how long will the process take? Is
> it less time
> >with the higher volts?
> >I will be using distilled water, silver coins .9999 pure, +
> aqu.pump in a
> >14oz glass ( but I would like to use a 48qz mason jar I have).
> I would
> >like to do the best job I can within budget.
> >
> > Looking for a little guidance from other members. Been
> reading alot of
> > your emails on the list in the last few weeks and thought it
> was time I
> > started adding to the overflow of email in my inbox lol. :)
> >
> > Just like to add that when I was using it before. One of
> the things I
> > used it for was very oily skin and would soak a few cotton
> pads with CS
> > and apply it to my face in some areas and just let the pad
> soak there for
> > qiute a while, sometimes till they became dry. I did this for
> a few years
> > with NO sign of grey or blue. Thought I would
> mention this as there has
> > been alot of talk lately about Paul (aka the blue man)
> >
> > Just like to add a Happy + Heathly New Year to all.
> >
> > Thanks
> > Ken
> >No virus found in this incoming message.
> >Checked by AVG Free Edition.
> >Version: 7.5.516 / Virus Database: 269.19.0/1216 - Release
> Date: 1/9/2008
> >10:16 AM
>
>
>
> --
> The Silver List is a moderated forum for discussing Colloidal Silver.
>
> Instructions for unsubscribing are posted at: http://silverlist.org
>
> To post, address your message to: [email protected]
>
> Address Off-Topic messages to: [email protected]
>
> The Silver List and Off Topic List archives are currently down...
>
> List maintainer: Mike Devour <[email protected]>
>
>
>
