The tubing could be bent in a U so the inside is unexposed. On Fri, Jan 6, 2012 at 12:53 PM, D Glover <[email protected]> wrote:
> But the tubes would be filled with oxide particles that you couldn't clean > out and you would be leaving them in the tubes to seed big ionic clusters > in your next batch, leading to bottoming out. I would suggest wire is still > the best, I use 12 electrodes cut from 2 metres of 2 mm 99.999% pure silver > from Alfa Aesar in Germany, a subdivision of Johnson Matthey (I know I > have mentioned some of this before to you, just repeating a little for the > benefit of new readers). > > On Fri, Jan 6, 2012 at 8:30 PM, David AuBuchon > <[email protected]>wrote: > >> I am thinking that may be the case. Though it may also be that finding >> out how to tweak the parameters correctly could get much higher than >> 50PPM. It would be interesting for people with different types of gens to >> try it on their setups. Basically run it until the conductance peaks. >> Then clean the electrodes and put the electrodes back in the solution, but >> rotate it say 90 degrees (just so they are not in the same location as they >> just were). Then keep repeating until conductance does not increase at all >> with brewing. At this point, let the brew sit for a day, then try again. >> >> I think using silver tubing instead of wires might help for higher PPMs. >> >> >> On Fri, Jan 6, 2012 at 1:57 AM, Alchemysa <[email protected]> wrote: >> >>> So, would you say that making highly ionic CS is not really that >>> difficult after all? >>> >>> David >>> (Australia) >>> >>> >>> >>>>> >>>> From: David AuBuchon <[email protected]> >>>> Date: 5 January 2012 7:25:48 AM >>>> To: [email protected] >>>> Subject: Re: CS>The Silvercell process? >>>> >>>> >>>> I stopped brewing at about a stable 50 uS. Slight yellow tinge. It is >>>> possible it could go higher if I just kept sticking the generator in it. >>>> But I got bored. This concentration brew also does not appear to make me >>>> herx or anything. >>>> >>> >>> >>> -- >>> The Silver List is a moderated forum for discussing Colloidal Silver. >>> Rules and Instructions: http://www.silverlist.org >>> >>> Unsubscribe: >>> <mailto:silver-list-request@**eskimo.com<[email protected]> >>> ?subject=**unsubscribe> >>> Archives: http://www.mail-archive.com/**[email protected]/** >>> maillist.html<http://www.mail-archive.com/[email protected]/maillist.html> >>> >>> Off-Topic discussions: >>> <mailto:silver-off-topic-list@**eskimo.com<[email protected]> >>> > >>> List Owner: Mike Devour <mailto:[email protected]> >>> >>> >>> >> >
