Hi Group,
I just joined this list 2 days ago. I looked in the archives and saw
many names that I recognized from some of the Yahoo groups I am in.
I would like to know how to make CS or EIS, whatever is better or
cheaper or easier. I am not really flush with money, but I have enough.
I read an article on Mercola's site that gave some other websites about
CS. http://www.silver-colloids.com/Reports/reports.html has a report on
32 brands of CS, with the home made brew only in fifth place, and that
is with a $700 SG-7. I also saw a video on YouTube showing a 3 times 9
volt battery setup that appeared to work. There are big differences
between those 2 devices.
I have access to distilled water as I have 4 older machines that I can
get working. I use RO for my drinking water.
I also have a 30 volt 3amp regulated DC power supply. I read that 30
volts was best, but 27 volts good enough. But, I also read that AC
current is best. If AC current is best, what frequency is best and what
is the correct current to make the smallest silver particles?
If DC is better, I can set the power supply to limit the current if I
know what the limit should be.
I read that someone from this list considers 85% ionic silver and 15%
colloidal silver optimal. Is this the consensus? Is 100% CS impossible
to obtain, or undesirable due to cost or ineffectiveness?
Enough questions for now,
Joe H.
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:[email protected]?subject=unsubscribe>
Archives:
http://www.mail-archive.com/[email protected]/maillist.html
Off-Topic discussions: <mailto:[email protected]>
List Owner: Mike Devour <mailto:[email protected]>
