Sandra: My experience has always been exactly like yours. 6.0 to 6.6 Dave On Fri, Oct 3, 2014 at 2:04 PM, Sandra George <oha...@juno.com> wrote:
> Hi There Neville - I have just tested my EIS with ph strips for urine and > the EIS is showing mine at 6.0 acid > I am probably using the wrong testers as this is all I have to test with - > over to you for your input - thanks > Sandee🐬 > Attitude is everything !!! > Sandra George > Colloidal Silver Products > Eye Drops & Topical Gel > aliveagai...@yahoo.com > > > > On 3 Oct 2014, at 14:51, Sandra George <oha...@juno.com> wrote: > > Hi There Neville - am I to understand for this post that EIS or CS is > alkaline and if so then this is the secret I have been looking for for a > while and will explain many observances of mine !!!! > Thanks > Sandee🐬 > Attitude is everything !!! > Sandra George > Colloidal Silver Products > Eye Drops & Topical Gel > aliveagai...@yahoo.com > > > > On 3 Oct 2014, at 06:45, Neville <one.red...@hotmail.com> wrote: > > I had two samples tested for Ph, one was shortly after brewing, which > returned high alkaline as it apparently went off his scale, the second > sample had been in storage for a while and was around base 7 point > something. This ties in with several samples which had been in storage for > a while I had lab analysed years ago... > > Clear solution - 7.4Ph, conductivity 23uS/cm > Yellow - 7.5,.......................19 > Amber - 7.4.......................20 > and another I only noted the date for - 7.8Ph, conductivity 24. This one > was noted on the report as being a low volume sample for testing purposes. > First three water temperature 21C and the last was 22C. > > I have always been of the opinion there *could?* be a difference in > efficacy for a given health issue or injury circumstance dependant on how > long after brewing it is ingested/applied. This is why I am also of the > opinion there are more options available with the home produced product > over the shop bought product, i.e. high alkaline Ph solution and more base > Ph solution. > > Only my opinions of course, but I'm sticking to them until proven > otherwise as I haven't found any information relating to efficacy related > to Ph of solution, and in all likelihood I never will <g>. > > N. > > > Date: Fri, 3 Oct 2014 18:02:16 +0930 > From: alch...@kern.com.au > To: silver-list@eskimo.com > Subject: CS>New Generator choice of three? > > > > From: Top Dog <rsh...@gmail.com> > Date: 30/09/2014 4:18 AM > > 3. Silver Lungs: Watched the videos and read a few websites that tout > the commercial like nature of this machine and it's reliability. I do like > the bigger silver rods as it should keep from having to buy a new set for a > while. Like the polarity reversal function to keep the rods evenly used. > Also not sure if having the water a higher PH does really make a difference > although it sounds plausible. This unit is high on my list but it does > show that it is 4 weeks on backorder which makes me wonder if there is a > supply problem or just that popular. > > The Silverlungs presentation is nice but .... > > - It has no manual over-ride so you can't make it stronger than 20ppm. > > - It seems you are stuck with a fixed jar size, and it has to be a beaker. > > - The high '10' pH claim is dubious. Basically it makes colloidal silver > the same way as any other machine but 'somehow' the pH comes out much > higher! It doesnt really add up. See the reports for many ionic silver > products at www.silver-colloids.com and you'll see that the pH is always > around 5 to 7. (Not that it really matters anyway. A mouthful of CS is > hardly going to change your body's alkalinity). > > - It makes a litre of 10ppm in about 90mins. This is almost too quick. 1 > mA at the electrodes is generally considered to be the ideal current to > produce the smallest particles. To make CS that fast would require a much > higher current.. and consequently produce larger particles. I'd like to see > a proper particle size report, not that TEM stuff on their site. (This > report explains why TEM images for colloidal silver are extremely > misleading...http://www.silver-colloids.com/Pubs/TEM.html) > > > David > > > > ____________________________________________________________ > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: > <mailto:silver-list-requ...@eskimo.com?subject=unsubscribe> > Archives: > http://www.mail-archive.com/silver-list@eskimo.com/maillist.html > > Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com> > List Owner: Mike Devour <mailto:mdev...@eskimo.com> > > > ____________________________________________________________ > Medicare Sleep Apnea > Medicare approved coverage for an oral appliance for sleep apnea. > http://thirdpartyoffers.juno.com/TGL3165/542ef2193462b7219081emp05vuc > > >
