Thanks for the confirm Dave - I am very aware that we are only talking ball 
park numbers however a good guide line for more experiences and hopefully more 
knowledge shared
Regards
Sandee🐬
Attitude is everything
Alive Again Colloidal Silver
Eye drops & Topical Gel
[email protected]

On Oct 3, 2014, at 10:37 PM, Da Darrin <[email protected]> wrote:

Sandra:
My experience has always been exactly like yours. 6.0 to 6.6
Dave

> On Fri, Oct 3, 2014 at 2:04 PM, Sandra George <[email protected]> wrote:
> Hi There Neville - I have just tested my EIS with ph strips for urine and the 
> EIS is showing mine at 6.0 acid
> I am probably using the wrong testers as this is all I have to test with - 
> over to you for your input - thanks
> Sandee🐬
> Attitude is everything !!!
> Sandra George
> Colloidal Silver Products
> Eye Drops & Topical Gel
> [email protected]
> 
> 
> 
> On 3 Oct 2014, at 14:51, Sandra George <[email protected]> wrote:
> 
> Hi There Neville - am I to understand for this post that EIS or CS is 
> alkaline and if so then this is the secret I have been looking for for a 
> while and will explain many observances of mine !!!!
> Thanks
> Sandee🐬
> Attitude is everything !!!
> Sandra George
> Colloidal Silver Products
> Eye Drops & Topical Gel
> [email protected]
> 
> 
> 
> On 3 Oct 2014, at 06:45, Neville <[email protected]> wrote:
> 
> I had two samples tested for Ph, one was shortly after brewing, which 
> returned high alkaline as it apparently went off his scale, the second sample 
> had been in storage for a while and was around base 7 point something.  This 
> ties in with several samples which had been in storage for a while I had lab 
> analysed years ago...
> 
> Clear solution - 7.4Ph, conductivity 23uS/cm
> Yellow - 7.5,.......................19
> Amber - 7.4.......................20
> and another I only noted the date for - 7.8Ph, conductivity 24.  This one was 
> noted on the report as being a low volume sample for testing purposes.
> First three water temperature 21C and the last was 22C.
> 
> I have always been of the opinion there *could?* be a difference in efficacy 
> for a given health issue or injury circumstance dependant on how long after 
> brewing it is ingested/applied.  This is why I am also of the opinion there 
> are more options available with the home produced product over the shop 
> bought product, i.e. high alkaline Ph solution and more base Ph solution.
> 
> Only my opinions of course, but I'm sticking to them until proven otherwise 
> as I haven't found any information relating to efficacy related to Ph of 
> solution, and in all likelihood I never will <g>.
> 
> N.
> 
> 
> Date: Fri, 3 Oct 2014 18:02:16 +0930
> From: [email protected]
> To: [email protected]
> Subject: CS>New Generator choice of three?
> 
> 
> 
> From: Top Dog <[email protected]>
> Date: 30/09/2014 4:18 AM
> 
> 3.  Silver Lungs:  Watched the videos and read a few websites that tout the 
> commercial like nature of this machine and it's reliability.  I do like the 
> bigger silver rods as it should keep from having to buy a new set for a 
> while.  Like the polarity reversal function to keep the rods evenly used.  
> Also not sure if having the water a higher PH does really make a difference 
> although it sounds plausible.  This unit is high on my list but it does show 
> that it is 4 weeks on backorder which makes me wonder if there is a supply 
> problem or just that popular.
> 
> The Silverlungs presentation is nice but ....
> 
> -  It has no manual over-ride so you can't make it stronger than 20ppm.
> 
> -  It seems you are stuck with a fixed jar size, and it has to be a beaker.
> 
> -  The high '10' pH claim is dubious. Basically it makes colloidal silver the 
> same way as any other machine but 'somehow' the pH comes out much higher! It 
> doesnt really add up. See the reports for many ionic silver products at 
> www.silver-colloids.com and you'll see that the pH is always around 5 to 7. 
> (Not that it really matters anyway. A mouthful of CS is hardly going to 
> change your body's alkalinity).
> 
> -  It makes a litre of 10ppm in about 90mins. This is almost too quick. 1 mA 
> at the electrodes is generally considered to be the ideal current to produce 
> the smallest particles. To make CS that fast would require a much higher 
> current.. and consequently produce larger particles. I'd like to see a proper 
> particle size report, not that TEM stuff on their site.  (This report 
> explains why TEM images for colloidal silver are extremely 
> misleading...http://www.silver-colloids.com/Pubs/TEM.html)
> 
> 
> David
> 
> 
> 
> ____________________________________________________________
> 
> 
> 
> --
> The Silver List is a moderated forum for discussing Colloidal Silver.
>  Rules and Instructions: http://www.silverlist.org
> 
> Unsubscribe:
>  <mailto:[email protected]?subject=unsubscribe>
> Archives:
>  http://www.mail-archive.com/[email protected]/maillist.html
> 
> Off-Topic discussions: <mailto:[email protected]>
> List Owner: Mike Devour <mailto:[email protected]>
> 
> 
> ____________________________________________________________
> Medicare Sleep Apnea
> Medicare approved coverage for an oral appliance for sleep apnea.
> http://thirdpartyoffers.juno.com/TGL3165/542ef2193462b7219081emp05vuc
> 
> 



____________________________________________________________