On 12/12/2014 05:01 PM, Reece Maxey wrote:
OK, been reading these educational postings for a while now,
and just finished my
first batch of silver; about 3 quarts. I will have more
production as better containers
become available.
Setup is:
1. 1quart glass pickle jar for "process".
2. 24 volt DC adapter, cost $ 5.00 at Tulsa flea market
3. 2 alligator clips, $ .85 from eBay
4. 1 gallon jug for storage, $6.95 at flea market
5. 1 spring loaded Speaker clip from eBay
6. 2 six inch pieces .9999 silver wire, $ 12.80
7. 1 "Lubber" TDS meter, $ 9.95
The meter tells me the resultant water is 7 ppm, it is clear.
Made the silver in three batches of various quantity,
time 1.45 to 2.0 hours.
Costs for shipping not included.
Hope this doesn't bore all you experts.
Thanks for all the excellent posts.
I also picked up a 24 volt AC adapter. Anyone ever tried this?
I started out almost exactly like this, except that I used a
9 volt supply. I think 24 volt sources waste too much
silver as oxide and silver particles attached to the silver
electrodes.
--
Regards,
John Popelish
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:[email protected]?subject=unsubscribe>
Archives:
http://www.mail-archive.com/[email protected]/maillist.html
Off-Topic discussions: <mailto:[email protected]>
List Owner: Mike Devour <mailto:[email protected]>
