DMSO will make CS go deeper. I make a roll-on with 75%CS, 15%glycerine or aloe, and added last, 10%DMSO.(Brooks Bradley invented thei 'Brooks' Mix: good for so many topical things, as well as stuff beneath the skin. Be well, Léna On Dec 14, 2014, at 9:03 AM, [email protected] wrote:
> > To anyone > Sometime ago someone wrote how to make cs go deeper. I think it was 1 drop > of H202 to 4 oz of cs. > Is this ratio right? > Thank you > Mary-------------------------------------------- > On Sat, 12/13/14, Reece Maxey <[email protected]> wrote: > > Subject: Re: CS>making a generator > To: "[email protected]" <[email protected]> > Date: Saturday, December 13, 2014, 7:07 PM > > Thanks > Neville, I did check water before running process. It tested > 1 ppm right out of jug. > Thinking about putting a variable > resistor in series with one of the anodes so as to > beable to vary voltage to the "load". > Seems as though there was quite a bit of > oxidationwith the 24 volts. I believe I read > somewhere that constant current Is better than > constant current. Still looking into that, any > thoughts? > I just re > sampled the silver, got a 10 ppm reading, this after 2 days > after combining the3 small batches I made. Is > also light Amber color. I'm still looking for advice > from all youfolks, particularly treating > sinusitis.Reece > Sent > from my iPad > On Dec 13, > 2014, at 3:45 AM, Neville <[email protected]> > wrote: > > > > #yiv2132523477 #yiv2132523477 -- > .yiv2132523477hmmessage P > { > margin:0px;padding:0px;} > #yiv2132523477 body.yiv2132523477hmmessage > { > font-size:12pt;font-family:Calibri;} > #yiv2132523477 > Don't forget to measure the water prior > to production as you will need to deduct that reading from > your end result to get a better - "ball park" - > figure. > I run mine up to > around 17-20 odd in a given time frame and by the time the > solution stabilises after a couple of days it usually drops > around 4-5ppm as some ions are lost to ion clusters > {particles}, then if I deduct the initial reading prior to > production it will drop a further 1-3ppm dependant on purity > of particular batch of DW I used. The ion/particle ratio > will obviously change during stabilisation period but the > amount of silver content won't change, unless of course > gravity pulls some out of suspension, which should not > happen anyway if everything is going according to > plan. > N. > > >> Date: Fri, 12 Dec 2014 20:30:11 > -0500 >> From: [email protected] >> To: [email protected] >> Subject: Re: CS>making a generator >> >> On 12/12/2014 05:01 > PM, Reece Maxey wrote: >>> OK, been > reading these educational postings for a while now, >>> and just finished my >>> first batch of silver; about 3 > quarts. I will have more >>> > production as better containers >>> > become available. >>> >>> Setup is: >>> > 1. 1quart glass pickle jar for "process". >>> 2. 24 volt DC adapter, cost $ 5.00 > at Tulsa flea market >>> 3. 2 > alligator clips, $ .85 from eBay >>> > 4. 1 gallon jug for storage, $6.95 at flea market >>> 5. 1 spring loaded Speaker clip from > eBay >>> 6. 2 six inch pieces .9999 > silver wire, $ 12.80 >>> 7. 1 > "Lubber" TDS meter, $ 9.95 >> >> >>> The meter tells me the > resultant water is 7 ppm, it is clear. >> >> Made the silver in three batches of various > quantity, >>> time 1.45 to 2.0 > hours. >>> Costs for shipping not > included. >>> >> >> Hope this doesn't bore all you experts. >>> Thanks for all the excellent > posts. >>> >>> I > also picked up a 24 volt AC adapter. Anyone ever tried > this? >> >> I started > out almost exactly like this, except that I used a >> 9 volt supply. I think 24 volt sources > waste too much >> silver as oxide and > silver particles attached to the silver >> electrodes. >> -- >> Regards, >> >> John Popelish >> >> The Silver List is a moderated forum for > discussing Colloidal Silver. >> Rules > and Instructions: http://www.silverlist.org >> >> Unsubscribe: >> <mailto:[email protected]?subject=unsubscribe> >> Archives: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> Off-Topic > discussions: <mailto:[email protected]> >> List Owner: Mike Devour <mailto:[email protected]> >> >> > > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: > <mailto:[email protected]?subject=unsubscribe> > Archives: > http://www.mail-archive.com/[email protected]/maillist.html > > Off-Topic discussions: <mailto:[email protected]> > List Owner: Mike Devour <mailto:[email protected]> > >
