Hi Marshall, Not being very tech adept I was trying, not well, to say that one conductor, which is a plate approx 1"x2", is auspended in the water. The other conductor is a wedge shaped piece of silver with the pointed end suspended approx. 3/16" above the water and arcing down to it. There is a definite ozone smell while the unit is operating.
Sorry for the confusion. Bill At 10:35 4/7/00 -0400, you wrote: >[email protected] wrote: > >> Hi Ivan, >> >> The "Motherlode" uses HVAC and the cathode is immersed but the anode is >> suspended approx 3/16ths of an inch above the water and arcs to the water. >> It makes 1 gal of approx 8ppm in 2 hrs. It uses 15,000v. > >This is contradictory. If the system is AC then there is no "anode" and >"cathode". They would alternate 60 times per second. > >Marshall > > >-- >The silver-list is a moderated forum for discussion of colloidal silver. > >To join or quit silver-list or silver-digest send an e-mail message to: >[email protected] -or- [email protected] >with the word subscribe or unsubscribe in the SUBJECT line. > >To post, address your message to: [email protected] >Silver-list archive: http://escribe.com/health/thesilverlist/index.html >List maintainer: Mike Devour <[email protected]> > > > Sincerely, Bill ______________________________________________________ The wave of the Future http://www.alphacomopportunity.com/cgi-bin/d.cgi/6032 ______________________________________________________
