Then it appears that they are producing a colloid by sputtering and/or evaporation, rather than electrolysis. In that case all bets are off as far as what will be produced and so forth, since all our analysis has been strictly for electrolysis production.
Marshall [email protected] wrote: > Hi Marshall, > > Not being very tech adept I was trying, not well, to say that one > conductor, which is a plate approx 1"x2", is auspended in the water. The > other conductor is a wedge shaped piece of silver with the pointed end > suspended approx. 3/16" above the water and arcing down to it. There is a > definite ozone smell while the unit is operating. > > Sorry for the confusion. > Bill > At 10:35 4/7/00 -0400, you wrote: > >[email protected] wrote: > > > >> Hi Ivan, > >> > >> The "Motherlode" uses HVAC and the cathode is immersed but the anode is > >> suspended approx 3/16ths of an inch above the water and arcs to the water. > >> It makes 1 gal of approx 8ppm in 2 hrs. It uses 15,000v. > > > >This is contradictory. If the system is AC then there is no "anode" and > >"cathode". They would alternate 60 times per second. > > > >Marshall > > > > > >-- > >The silver-list is a moderated forum for discussion of colloidal silver. > > > >To join or quit silver-list or silver-digest send an e-mail message to: > >[email protected] -or- [email protected] > >with the word subscribe or unsubscribe in the SUBJECT line. > > > >To post, address your message to: [email protected] > >Silver-list archive: http://escribe.com/health/thesilverlist/index.html > >List maintainer: Mike Devour <[email protected]> > > > > > > > Sincerely, > Bill > ______________________________________________________ > > The wave of the Future > http://www.alphacomopportunity.com/cgi-bin/d.cgi/6032 > ______________________________________________________
