Marshall; My colloid has a particle size of 1-2 nm and 6-8 nm about equally divided. It is crystal clear with almost no T.E. and no dropout. The TEM's in case I haven't sent you one shows and energy structure that Stephen Quinto has never seen before. When he processed mine they are numbered 260 & 261. Also the CS made by Dr. Bill Biagioli exhibits the same parameters!!!
It has No3 = 0.0 ppm and a conductance of 27 uS after stabilizing and the ppm is 11.0 (spect.) and 11.58 (AA) > A 12KV transformer would run at about 8 KV, which I find too low for good > colloid. > Will your CS meet my specs.? > > If you run a neon sign transformer way above it's design voltage of abou 70% > of > it's nameplate voltage, it will fail from insulation failure, and if you run > it for > long periods below it it will fail from overheating. > > Load must be varied to maintain the proper output voltage of the transformer, > or > early failure will likely result. > > I would like to see the source of this data!! > While I have never designed a transformer of neon sign service, I have designed transformers for the old tube type ham radio transmitters, as well as pulse welding transformers, and your statements do not compute. "Ole Bob"
