Yesterday I made a 16 oz batch of CS using virtually the same methods I
have used before.
In the past, I have used the 27 volt LVDC generator, with 2 small 12 volt
batteries connected in series.
This would be 51 VDC, virtually the same as the telephone generator I am
testing.
I used no saline. Added about 1 oz CS from a previous batch. ( 16 oz batch )
The color is lemon, or pale yellow and tastes bitter. The time on this
batch was about 3.5 hours.
After determining that the batch was ok, ( or so I thought ) I used a four
ounce bottle and mixed 50-50 with DMSO for a fungicide treatment to be used
for toenail fungus.
Even thru the brown bottle, I could see strange things happening. Plus a
noticable warming effect was noticed.
The bottle did not get hot, but it was more than slightly warm. Medium
warm, but not hot.
After a time, it cooled off.
The bottle was a 4 ounce dropper bottle with the rubber bulb. No glass or
plastic dropper tube was installed in the rubber bulb. The bottle was
about 90% full.
12 hours later, the bottle was about 20 % full. The top was screwed on
with a reasonable tension.
Can anyone offer and facts as to what happened?
I have 16 ounces of the CS and more of the DMSO. Should I see if this will
happen again?
Wayne
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>
