Wayne, A characteristic of DMSO is that it gives off heat when diluted with water. I can't explain the loss of volume. regards, Tony
Wayne Fugitt wrote: > > Yesterday I made a 16 oz batch of CS using virtually the same methods I > have used before. > > In the past, I have used the 27 volt LVDC generator, with 2 small 12 volt > batteries connected in series. > This would be 51 VDC, virtually the same as the telephone generator I am > testing. > > I used no saline. Added about 1 oz CS from a previous batch. ( 16 oz batch ) > > The color is lemon, or pale yellow and tastes bitter. The time on this > batch was about 3.5 hours. > > After determining that the batch was ok, ( or so I thought ) I used a four > ounce bottle and mixed 50-50 with DMSO for a fungicide treatment to be used > for toenail fungus. > > Even thru the brown bottle, I could see strange things happening. Plus a > noticable warming effect was noticed. > The bottle did not get hot, but it was more than slightly warm. Medium > warm, but not hot. > > After a time, it cooled off. > > The bottle was a 4 ounce dropper bottle with the rubber bulb. No glass or > plastic dropper tube was installed in the rubber bulb. The bottle was > about 90% full. > > 12 hours later, the bottle was about 20 % full. The top was screwed on > with a reasonable tension. > > Can anyone offer and facts as to what happened? > > I have 16 ounces of the CS and more of the DMSO. Should I see if this will > happen again? > > Wayne > -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
