Hi all, Nice work Tony, is that easy to do, (for a computer beginner). Namaste,
Leo. ----- Original Message ----- From: "Tony Moody" <[email protected]> To: <[email protected]> Sent: Tuesday, November 20, 2001 6:24 AM Subject: Re: CS>Digital Multimeter > Ed, > Here is a picture of how to connect a multimeter into the CS making > circuit. With that sort of voltage, Be Care Full. Switch off before > touching anything. Standby and be prepared to switch off in a hurry in > case you get connections wrong. > Tony > > Ed Kasper wrote: > OK I bought one at Radio Shack for $15 a digital one > NOW how do I use? > Do I just put both the positive and negative ends in the water? > - after I unplugged the unit... > I am using 110VAC volts to a bridge rectifier the output I believe is > 54 VDC (2) 10 inches of wet silver (total 20 inches of wet silver) 5 > inches apart mechanical stirrer in center (cheapest radio shack motor) > one and half gallon distilled water > sorry, I read earlier posts but I'm still confused about it. > Ed > > Chuck wrote: > Unhook one of your silver rods from the power supply. > Connect the multimeter to the power suppy terminal you unhooked. > Connect the other multimeter lead to the silver wire you unhooked. > Make SURE your multimeter is set to read milliamps. > Don't be surprised if it reads 0 when you turn it on, it should > increase within several minutes. > Chuck > Go Lemmings Go! ---------------------------------------------------------------------------- ---- -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
