I don't think you will be able to get a definitive answer on this on the list. There are too many variables. How much water is down there that needs treatment. Is the water static, or flowing? Are you wanting to use one treatment or a continuous treatment?
I don't think it would be practical to try and fix the well. The best you can probably do would be to inject CS into the water as it comes from the well, or maybe even better, make it in the water as it passed by. Then you know the flow rate, volume, and of course you are only treating the water you are using, not all the water for perhaps miles around. Then of course, tests would have to be rerun to verify that it accomplishing what you want. Marshall Satchid wrote: > Dear researchers > > 2 months ago we had a well drilled 40 m deep. The geological institute in > Brussels told us that there would be good drinkable water without treatment > (Before starting to drill). Now the tests from the laboratory revealed that > there is very bad bacteria (even bacteria that could kill someone) in the > water. This is because the well is about 50 m away from a canal built for > boat traffic about 100 years ago. > > There are very little or no salts in the water, the ion contend I 1.5 ppt. > This well was very expensive to drill. Therefore we want to use it. > > Would a injection of ionic silver be able to make the water drinkable? > > If so, How would I proceed to do this? Would it be better to make the cs in > the water stream in real time or > inject remade cs to in the water? > > I will appreciate every suggestion. > > Willy. > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]>
