I am almost sure that you are right. Satchid
-----Original Message----- From: Trem [mailto:[email protected]] Sent: vrijdag 18 januari 2002 20:26 To: [email protected] Subject: Re: CS>colloidal gold. Hi Satchid, I suspect you are making colloidal silver. Gold atoms are not going to dissociate at that voltage. I'll bet the reverse current leakage on your diode bridge is allowing enough current to flow on the reverse cycles to let the silver become the anode for brief periods. Trem At 07:26 PM 1/18/2002 +0100, you wrote: >I tried today (probably still with the right transformers to make colloidal >gold. I could not get good result. the one transformer is to low voltage >(4500 V 100 ma) the other is 8000V 50 Ma. >I decided to try the low voltage way again but not that low. So, I took a >Diode bridge and connected the AC side directly to the main 240v then I >connected the positive to the gold electrode the negative to a silver >electrode. At first I had current but it stayed almost stable. Then It >started slowly to go up from 1.35 ma and it is now already at 9 ma and this >after about 45 minutes. For this I used no current limiting. >Do you think that I have colloidal Gold? > >Thank You > >Satchid > > >-- >The silver-list is a moderated forum for discussion of colloidal silver. > >To join or quit silver-list or silver-digest send an e-mail message to: >[email protected] -or- [email protected] >with the word subscribe or unsubscribe in the SUBJECT line. > >To post, address your message to: [email protected] >Silver-list archive: http://escribe.com/health/thesilverlist/index.html >List maintainer: Mike Devour <[email protected]>
