Carbo-hydroxy, AKA AquaFuel, is a gas that equates to ~160 octane and can
runs cars with no soot emmissions but water droplets & CO2. Timing is reset
to 'top dead center.' Anyway, it is made by collecting the bubbles from an
*underwater arc* between two carbon rods. A standard welder ("buzz box")
produces the requisite V.
--Russ
----- Original Message -----
From: Satchid <[email protected]>
To: <[email protected]>
Sent: Friday, January 18, 2002 5:57 PM
Subject: RE: CS>colloidal gold.
> Hi Wayne
>
> My input voltage is 240v, dropped this experiment.
>
> I am now back on HVAC. I have now two neon transformers: 1= 4500 V at 100
mA
> the other is 9200 V 50 mA. I just cant get them firing in the water. I
have
> no experience on this subject. I can find no instructions at all on the
> internet. I am a little bit stuck on this.
>
> Satchid
>
> -----Original Message-----
> From: Wayne Fugitt [mailto:[email protected]]
> Sent: zaterdag 19 januari 2002 0:44
> To: [email protected]
> Subject: Re: CS>colloidal gold.
>
>
> Evening Satchid,
>
> >>At first I had current but it stayed almost stable. Then It
> >started slowly to go up from 1.35 ma and it is now already at 9 ma and
this
> >after about 45 minutes. For this I used no current limiting.
>
> Do you want the current to stay stable at some specific value, after it
> increases to that value?
>
> If so, a good autoformer connected into the ac line would let you
> control it nicely. I have collected a number of the autoformers over the
> years. Before I learned how to build solid state supplies, I would use
> these in many ways to obtain variable voltages of specific values.
>
> Building neat little circuits in the late 50's and early 60's was a bit
> different than it is today. What is your input voltage? 120, 240, or
> 480, ac? Surely not 277 VAC?
>
> Wayne
>
>
>
> --
> The silver-list is a moderated forum for discussion of colloidal silver.
>
> To join or quit silver-list or silver-digest send an e-mail message to:
> [email protected] -or- [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
> Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> List maintainer: Mike Devour <[email protected]>
>
