Good approach Jack. Gaston
================================================= ----- Original Message ----- From: "Jack Dayton" <[email protected]> To: <[email protected]> Sent: Saturday, July 20, 2002 1:42 PM Subject: Re: CS>Filtering thoughts... > > > > From: "Gaston" <[email protected]> > > > Subject: Re: CS>Filtering thoughts... > > > > One of the other factor(s) that does not seem to be emphasized enough is > > to keep all CS containers and equipment very clean. I use distilled water to > > rinse them several times prior to use. This is most important, otherwise CS > can be contaminated. > > Hi Gaston, > > I take a different approach about cleaning the container that I make > my CS in. Having selected the container that I will be using, I clean > it very carefully, then rinse thoroughly with DW twice, when a batch > is completed it is decanted into the containers I will draw from, and I do > not have to worry about having to clean it each time I produce a batch, > because no contamination can occur with my production container, > since it has a seal able lid. > > OK listers, what is wrong with my method? > > PS I don't produce gray fuzzies that might fall from the cathode into > the container. > > Jack > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > Instructions for unsubscribing may be found at: http://silverlist.org > > To post, address your message to: [email protected] > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > List maintainer: Mike Devour <[email protected]> >
