Maybe I should do some more research before proceeding. I do have another question though.

I bought 3 bottles of CS from Utopia Silver, then decided to make my own so I bought some silver rods and a CS tester that was supposed to measure the PPM. The first thing that I did when the tester arrived was to measure the PPM of the Utopia CS and it showed 7PPM, their site said it was 20 PPM. I wrote to them and their response was that home made CS was more ionic and the tester was callibrated for home made silver not commercial made. What does this mean and does it sound like they are simply selling 7 PPM and representing it to be 20 PPM?

Thanks again,

Jim

Marshall Dudley wrote:
A flyback will not work properly.  The voltage needed is proportional to the 
frequency, and a
flyback operates at around 16 KHZ.  You can use about one cycle per minute for 
30 Volts, and
60 at 10 KV.  For 15 KHZ it would likely take millions of volts.  Remember you 
have to suck
the ions far enough away from the electrode for a signinficant number of them 
to not be
sucked back during the reverse half cycle for it to work properly.

Marshall

Jim wrote:


We have an electronics store locally that has lots of used transformers
neon sign, or possibly a fly back transformer.  I've got plenty of time,
and like to experiment, I'll go see what I can get.

Jim

Marshall Dudley wrote:

Pretty easy to do with a 15KV neon sign transformer.

Marshall

Jim wrote:



Sounds like an interesting project to build a 10,000 V AC generator.  I
might give it a try.

Thanks Marshall

Jim

Marshall Dudley wrote:


Jim wrote:




I should have said gold, I've made it fast and the color is gold, if I
make it extremely slow, the color is clearer.  I've tried 15 V ac with
no results, I use a 17 V DC power supply and use resistance to limit the
current to slow the process down.


I used 30 VAC one time for over a week and got nothing. Unless you have enough 
voltage
to pull the ions fairly far from the anode during a half cycle, they get sucked 
right
back to it when it is the cathode and redeposited.  Typically when using AC, 
one uses
about 10,000 volts.

Marshall


--
The silver-list is a moderated forum for discussion of colloidal silver.

Instructions for unsubscribing may be found at: http://silverlist.org

To post, address your message to: [email protected]

Silver-list archive: http://escribe.com/health/thesilverlist/index.html

List maintainer: Mike Devour <[email protected]>