Hi,
I've made as high as 30-40 ppm. There are a number of possibilities. The
water that you are using?
Is the water 100 distilled. Even if it is distilled is it from a reliable
source?
I have also found that if you clean the ellectrodes more often you can get a
stronger batch. However, you may compromise the colour.
I've had mine for almost the same amount of time and will say that it is a
"NO BRAINER."
That's the nice thing about the "silverpuppy" If you speak with some of the
nice helpful people on here you'll discover that you won't need anything
higher then 20ppm. give or take.
I would strongly re read the instructions on the use and accuracy of the
solution and now the TDS meter works in relation to the CS.
It's been great for me and my friend who also owns one.
Ernie
ps. time to time, I've had the odd patch turn out funny. it happens. :-)
From: <[email protected]>
Reply-To: [email protected]
To: <[email protected]>
CC: <[email protected]>
Subject: Re: CS>SilverPuppy and Colloidal Copper
Date: Mon, 28 Aug 2006 01:19:44 -0700
Hello all,
I've had the Silver Puppy for about a year and a half and have never been
able to make CS stronger than 14ppms.
It turns off after about 4 hours and instructions said that it turns off at
20ppms, but that is totally untrue. When it turns off, my TDS meter shows
"4." If I switch over to manual mode and turn it back on for 2-4-6-10
hours it NEVER goes above 7ppms however many hours i run it.
I'm really unhappy with this thing, I've already replaced it once because
it just stopped working all together but it still just doesn't work as it
was represented.
Has anyone any thoughts on this? Is there something I'm doing wrong or
missing?
If this is how it is, I'm getting another type of unit. What would be your
recommendations?
Thank you,
Angel
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Address Off-Topic messages to: [email protected]
The Silver List and Off Topic List archives are currently down...
List maintainer: Mike Devour <[email protected]>
