On 23-03-18 16:17, Tim Shoppa wrote:
I'm sure those three standalone backup tapes are TU58 images which
aren't really "tapes" in the usual SIMH sense of the word. TU58 images
are a little more like "disks" in the emulator world.
You are correct! See the description were I found them [1, 2].
You do not attach them to "TS". I think you attach them to "TD0" in a
simulated 11/750 or maybe just maybe a 11/730. I do not know if they
would work on a 11/780 or if 11/780 ever supported booting from TU58.
Thanks for clearing that up. I saw a post that TU58 should be supported
for the VAX-11/780 but didn't see anything about bootable or not. Today
I will try to build the newest Simh to rule out any Debian specific
issues or older version issues. I didn't see a TD with show dev:
VAX780 simulator V3.8-1
Logging to file "logs/vms44.log"
sim> show dev
VAX780 simulator configuration
CPU, idle enabled=VMS
TLB, 2 units
SBI
MCTL0, nexus=1
MCTL1, nexus=2
UBA, nexus=3, autoconfiguration enabled
MBA0, nexus=8
MBA1, nexus=9
TODR
TMR
TTI
TTO
RX
DZ, address=2013E040-2013E05F*, vector=C0-DC, lines=32
CR, address=2013FE70-2013FE77, vector=98, 285 cards per minute,
translation 029
LPT, address=2013FF4C-2013FF4F, vector=80
RP, Massbus adapter 0, 8 units
RL, address=2013F900-2013F909, vector=70, 4 units
HK, address=2013FF20-2013FF3F, vector=88, 8 units
RQ, address=2013F468-2013F46B*, no vector, 4 units
RQB, disabled
RQC, disabled
RQD, disabled
RY, address=2013FE78-2013FE7B*, vector=B4, 2 units
TU, Massbus adapter 1, TM03, 8 units
TS, address=2013F550-2013F553, vector=94
TQ, TU81 (180MB), address=2013F940-2013F943, no vector, 4 units
XU, disabled
XUB, disabled
I don't think there's anything fundamentally wrong with using a
different version of standalone backup (later than VMS 4.4) to do the
restore.
Ok. A reader of my blog suggested getting OpenVMS and I will look into that.
If you wanted to be super historically correct on a 11/780 in the
mid-80's you would could be using the RX01 standalone backup floppies.
But then I must find images of those :-). In the VAX-11/782 website that
was mentioned there was a bootable RP06 (?) image, but that doesn't work
for me. But your mentioning bootable at least helps me understand some
of the procedures I found. It is now logical that some of the devices
they create use images and are not blank.
[1] http://iamvirtual.ca/VAX11/VAX-11-software.html
[2] http://www.bitsavers.org/pdf/dec/vax/vms/vmsTapePNs.txt
--
Henk van de Kamer
http://www.vandekamer.com/
http://www.hetlab.tk/
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
