The transport specified in the via header is TCP and thus you need to send it using TCP only.
Regards, Sanjay -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Vijayalakshmi Sent: Wednesday, October 13, 2010 3:04 PM To: [email protected] Subject: [Sip-implementors] Is TCP feasible for SIP?? Can I use TCP to send or receive this message. Is it feasible?? My message length will be approximately 500 bytes as follows NOTIFY sip:[email protected]:5060 SIP/2.0 Call-ID: [email protected] CSeq: 1 NOTIFY From: <sip:[email protected]:5060>;tag=343833444441FFFFFFFF To: <sip:[email protected]:5060> Max-Forwards: 70 Subscription-State: Active Event: message-summary Content-Type: application/simple-message-summary Via: SIP/2.0/TCP 135.111.122.64:5060;branch=z9hG4bK237262a4269abc6dd282d5f81f9d0ff2 Content-Length: 42 Messages-Waiting:YES Voice-Message: 1/0 Thanks in Advance.... Regards Vijayalakshmi Marudhanayagam _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus." _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
