Hello,
I have installed the version sipp-win32-3.1.1.exe for windows and and
i have changed the scenario file to
<recv request="BYE"></recv>
<nop>
<action>
<setdest host="172.21.29.2" port="5060" protocol="udp" />
</action>
</nop>
<send>
<![CDATA[
SIP/2.0 200 OK
[last_Via:]
[last_From:]
[last_To:]
[last_Call-ID:]
[last_CSeq:]
Contact: ric<sip:[local_ip]:[local_port];transport=[transport]>
Content-Length: 0
]]>
</send>
and an error occurs when i launch sipp
2008-07-08 15:01:15:370 1215525675.370099: Unknown action: setdest.
I have tried also with the unstable version sipp-win32-3.1.2(ossl)
with the same result, must i set a switch in the command line for this
to work.
I would apreciate all the help you can give me.
TIA
Ricardo Fernandes
On Tue, Jul 8, 2008 at 1:00 PM, Charles P Wright <[EMAIL PROTECTED]> wrote:
> You can change the address things are sent to in the latest trunk using
> the setdest action. Something like
> <setdest host="[$host]" port="[$port]" protocol="udp" />
>
> You will need to combine it with regular expressions. In UAS mode SIPp
> responds to the address that sent it a message. You can also change the
> SIPp source code to do something like that for UAC mode as well.
>
> Charles
>
> [EMAIL PROTECTED] wrote on 07/08/2008 07:51:30 AM:
>
>> Hello,
>>
>> I send this message to the forum last week, but i haven't obtain no
>> anwser yet.
>> Does anyone know if this is possible or not, i need to know as soon as
>> possible, i am
>> facing deadlines.
>> Just need a anwser yes or no and if yes how to do it.
>>
>> Thanks in advance
>> Ricardo
>>
>>
>> Hello,
>>
>> I am facing a problem with the [remote_ip] keyword when using sipp as
>> a sipp caller client.
>> I have tree sip server machines(machine A,B and C).
>> Machine A is a Load Balancing machine that distributes the sip
>> messages to B or C.
>> I set up the remote_ip has beeing the machine A.
>> Sipp send the sip message Invite to machine A and the sip messages
>> 100,180 ,486 or 200 are received from machine A.
>> Then i put the sipp client on hold, but the Invite message to sipp
>> cames from machine B, so the ack must go to machine B, but because
>> i defined that the [remote_ip] is machine A sipp sends the request to
>> machine A when sipp should send it to B.
>> Is there a way to change the [remote_ ip] on run time on the scenario
> file?
>> In the atachment goes my scenario file.
>> In this url http://www.tech-invite.com/Ti-sip-service-1.html is a
>> example of what i am trying to acomplish.
>>
>> Regards
>> Ricardo Fernandes
>> [attachment "ScenarioHold.xml" deleted by Charles P
>> Wright/Watson/IBM]
>>
> -------------------------------------------------------------------------
>> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
>> Studies have shown that voting for your favorite open source project,
>> along with a healthy diet, reduces your potential for chronic lameness
>> and boredom. Vote Now at http://www.sourceforge.net/community/cca08
>> _______________________________________________
>> Sipp-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/sipp-users
>
>
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
