You will need to download and compile the subversion trunk version. Charles
"Ricardo Fernandes" <[EMAIL PROTECTED]> 07/08/2008 10:13 AM To Charles P Wright/Watson/[EMAIL PROTECTED] cc [email protected], [EMAIL PROTECTED] Subject Re: [Sipp-users] Again : Can Sipp have multiple remote_ip acting as a Sip Client ? Hello, I have installed the version sipp-win32-3.1.1.exe for windows and and i have changed the scenario file to <recv request="BYE"></recv> <nop> <action> <setdest host="172.21.29.2" port="5060" protocol="udp" /> </action> </nop> <send> <![CDATA[ SIP/2.0 200 OK [last_Via:] [last_From:] [last_To:] [last_Call-ID:] [last_CSeq:] Contact: ric<sip:[local_ip]:[local_port];transport=[transport]> Content-Length: 0 ]]> </send> and an error occurs when i launch sipp 2008-07-08 15:01:15:370 1215525675.370099: Unknown action: setdest. I have tried also with the unstable version sipp-win32-3.1.2(ossl) with the same result, must i set a switch in the command line for this to work. I would apreciate all the help you can give me. TIA Ricardo Fernandes On Tue, Jul 8, 2008 at 1:00 PM, Charles P Wright <[EMAIL PROTECTED]> wrote: > You can change the address things are sent to in the latest trunk using > the setdest action. Something like > <setdest host="[$host]" port="[$port]" protocol="udp" /> > > You will need to combine it with regular expressions. In UAS mode SIPp > responds to the address that sent it a message. You can also change the > SIPp source code to do something like that for UAC mode as well. > > Charles > > [EMAIL PROTECTED] wrote on 07/08/2008 07:51:30 AM: > >> Hello, >> >> I send this message to the forum last week, but i haven't obtain no >> anwser yet. >> Does anyone know if this is possible or not, i need to know as soon as >> possible, i am >> facing deadlines. >> Just need a anwser yes or no and if yes how to do it. >> >> Thanks in advance >> Ricardo >> >> >> Hello, >> >> I am facing a problem with the [remote_ip] keyword when using sipp as >> a sipp caller client. >> I have tree sip server machines(machine A,B and C). >> Machine A is a Load Balancing machine that distributes the sip >> messages to B or C. >> I set up the remote_ip has beeing the machine A. >> Sipp send the sip message Invite to machine A and the sip messages >> 100,180 ,486 or 200 are received from machine A. >> Then i put the sipp client on hold, but the Invite message to sipp >> cames from machine B, so the ack must go to machine B, but because >> i defined that the [remote_ip] is machine A sipp sends the request to >> machine A when sipp should send it to B. >> Is there a way to change the [remote_ ip] on run time on the scenario > file? >> In the atachment goes my scenario file. >> In this url http://www.tech-invite.com/Ti-sip-service-1.html is a >> example of what i am trying to acomplish. >> >> Regards >> Ricardo Fernandes >> [attachment "ScenarioHold.xml" deleted by Charles P >> Wright/Watson/IBM] >> > ------------------------------------------------------------------------- >> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! >> Studies have shown that voting for your favorite open source project, >> along with a healthy diet, reduces your potential for chronic lameness >> and boredom. Vote Now at http://www.sourceforge.net/community/cca08 >> _______________________________________________ >> Sipp-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/sipp-users > > ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Sipp-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sipp-users
