On Thu, Feb 24, 2011 at 1:25 AM, Gopalakrishnan A.N <sai...@gmail.com>wrote:
> I did the installation it was perfect. while executing the sipp with the > following command > > ./sipp -i 192.168.0.75 -p 6060 -sf register.xml -inf data.txt -d 20000 > 192.168.0.63 -trace_err > Before testing with load, try a single call using "-m 1" and make sure the scenario runs without problems. If it doesn't, then get a packet capture of a single call and it will clearly show where the problem is. >From your log, Asterisk is just sending "404 Not Found" instead of requiring authentication so this is an issue with your Asterisk configuration. > > I get dead calls and aborted message. some thing related to 407 proxy > authentication, does it really required in the registration process. > The scenario is prepared to accept 401 or 407 (so that it can be used with servers that use one or another).
------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev
_______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
