Still I am struggling to register the basic script... let me take the wireshark log...
On Fri, Feb 25, 2011 at 4:10 PM, mayamatakeshi <mayamatake...@gmail.com>wrote: > > > On Fri, Feb 25, 2011 at 7:27 PM, Gopalakrishnan A.N <sai...@gmail.com>wrote: > >> I will check with wireshark tool as well. and moreover in the xml file you >> have mentioned some noop tag by assigning values and assigning strings. >> Actually what is the use of that, > > > They are used to keep re-registering using the same "call" (in SIPp terms) > by incrementing the value of CSeq. > > >> do we really required? > > > No. You can remove them. > > But to do it, please read > http://sipp.sourceforge.net/doc3.0/reference.html > > You will be able to do any meaningful work without reading the docs. > > >> >> On Thu, Feb 24, 2011 at 6:06 PM, mayamatakeshi >> <mayamatake...@gmail.com>wrote: >> >>> >>> >>> On Thu, Feb 24, 2011 at 9:30 PM, Gopalakrishnan A.N <sai...@gmail.com>wrote: >>> >>>> Thanks for your reply. I will try with single call. and moreover i am >>>> testing with trixbox and already I have some configured IP extensions, can >>>> I >>>> use those extensions in data.txt file? >>> >>> >>> Yes. >>> The injection file must contain valid data. Do not use the sample data >>> that was presented in the xml file. >>> >>> >>>> >>>> >>>> On Thu, Feb 24, 2011 at 8:46 AM, mayamatakeshi <mayamatake...@gmail.com >>>> > wrote: >>>> >>>>> >>>>> >>>>> On Thu, Feb 24, 2011 at 1:25 AM, Gopalakrishnan A.N >>>>> <sai...@gmail.com>wrote: >>>>> >>>>>> I did the installation it was perfect. while executing the sipp with >>>>>> the following command >>>>>> >>>>>> ./sipp -i 192.168.0.75 -p 6060 -sf register.xml -inf data.txt -d 20000 >>>>>> 192.168.0.63 -trace_err >>>>>> >>>>> >>>>> Before testing with load, try a single call using "-m 1" and make sure >>>>> the scenario runs without problems. >>>>> If it doesn't, then get a packet capture of a single call and it will >>>>> clearly show where the problem is. >>>>> >>>>> From your log, Asterisk is just sending "404 Not Found" instead of >>>>> requiring authentication so this is an issue with your Asterisk >>>>> configuration. >>>>> >>>>> >>>>>> >>>>>> I get dead calls and aborted message. some thing related to 407 proxy >>>>>> authentication, does it really required in the registration process. >>>>>> >>>>> >>>>> The scenario is prepared to accept 401 or 407 (so that it can be used >>>>> with servers that use one or another). >>>>> >>>>> >>>> >>>> >>>> -- >>>> Thank you with regards, >>>> Gopalakrishnan A.N. >>>> VoIP call - sip:sai...@gtalk2voip.com >>>> >>>> >>>> >>> >> >> >> -- >> Thank you with regards, >> Gopalakrishnan A.N. >> VoIP call - sip:sai...@gtalk2voip.com >> >> >> > -- Thank you with regards, Gopalakrishnan A.N. VoIP call - sip:sai...@gtalk2voip.com
------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev
_______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
