Forgot to attach the wireshark log. Please apply the filter in the filter box "sip || udp" to pin point the registration process.
On Tue, Mar 1, 2011 at 9:47 PM, Gopalakrishnan A.N <sai...@gmail.com> wrote: > I captured the wireshark log, I found that after the 100 message the call > is disconnecting because of BYE message. I tried some other script as well, > seems to be problem in my trixbox installation. I will install a fresh > Asterisk or Trixbox and will try. > > Also I suspect is that could be any pre-requiste lackage, means the way I > am trying is correct or not. I have installed SIPp in a centos machine and > trying to execute the the SIPp with optional command against TrixBox, in > TrixBox I have the extensions created that was mentioned in the data.txt > file. Is that enough or something I am missing? > > > > On Mon, Feb 28, 2011 at 7:04 PM, Gopalakrishnan A.N <sai...@gmail.com>wrote: > >> Still I am struggling to register the basic script... let me take the >> wireshark log... >> >> >> On Fri, Feb 25, 2011 at 4:10 PM, mayamatakeshi >> <mayamatake...@gmail.com>wrote: >> >>> >>> >>> On Fri, Feb 25, 2011 at 7:27 PM, Gopalakrishnan A.N <sai...@gmail.com>wrote: >>> >>>> I will check with wireshark tool as well. and moreover in the xml file >>>> you have mentioned some noop tag by assigning values and assigning strings. >>>> Actually what is the use of that, >>> >>> >>> They are used to keep re-registering using the same "call" (in SIPp >>> terms) by incrementing the value of CSeq. >>> >>> >>>> do we really required? >>> >>> >>> No. You can remove them. >>> >>> But to do it, please read >>> http://sipp.sourceforge.net/doc3.0/reference.html >>> >>> You will be able to do any meaningful work without reading the docs. >>> >>> >>>> >>>> On Thu, Feb 24, 2011 at 6:06 PM, mayamatakeshi <mayamatake...@gmail.com >>>> > wrote: >>>> >>>>> >>>>> >>>>> On Thu, Feb 24, 2011 at 9:30 PM, Gopalakrishnan A.N >>>>> <sai...@gmail.com>wrote: >>>>> >>>>>> Thanks for your reply. I will try with single call. and moreover i am >>>>>> testing with trixbox and already I have some configured IP extensions, >>>>>> can I >>>>>> use those extensions in data.txt file? >>>>> >>>>> >>>>> Yes. >>>>> The injection file must contain valid data. Do not use the sample data >>>>> that was presented in the xml file. >>>>> >>>>> >>>>>> >>>>>> >>>>>> On Thu, Feb 24, 2011 at 8:46 AM, mayamatakeshi < >>>>>> mayamatake...@gmail.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Thu, Feb 24, 2011 at 1:25 AM, Gopalakrishnan A.N < >>>>>>> sai...@gmail.com> wrote: >>>>>>> >>>>>>>> I did the installation it was perfect. while executing the sipp with >>>>>>>> the following command >>>>>>>> >>>>>>>> ./sipp -i 192.168.0.75 -p 6060 -sf register.xml -inf data.txt -d >>>>>>>> 20000 192.168.0.63 -trace_err >>>>>>>> >>>>>>> >>>>>>> Before testing with load, try a single call using "-m 1" and make >>>>>>> sure the scenario runs without problems. >>>>>>> If it doesn't, then get a packet capture of a single call and it will >>>>>>> clearly show where the problem is. >>>>>>> >>>>>>> From your log, Asterisk is just sending "404 Not Found" instead of >>>>>>> requiring authentication so this is an issue with your Asterisk >>>>>>> configuration. >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> I get dead calls and aborted message. some thing related to 407 >>>>>>>> proxy authentication, does it really required in the registration >>>>>>>> process. >>>>>>>> >>>>>>> >>>>>>> The scenario is prepared to accept 401 or 407 (so that it can be used >>>>>>> with servers that use one or another). >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Thank you with regards, >>>>>> Gopalakrishnan A.N. >>>>>> VoIP call - sip:sai...@gtalk2voip.com >>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>>> -- >>>> Thank you with regards, >>>> Gopalakrishnan A.N. >>>> VoIP call - sip:sai...@gtalk2voip.com >>>> >>>> >>>> >>> >> >> >> -- >> Thank you with regards, >> Gopalakrishnan A.N. >> VoIP call - sip:sai...@gtalk2voip.com >> >> >> > > > -- > Thank you with regards, > Gopalakrishnan A.N. > VoIP call - sip:sai...@gtalk2voip.com > > > -- Thank you with regards, Gopalakrishnan A.N. VoIP call - sip:sai...@gtalk2voip.com
test6.pcap
Description: Binary data
------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev
_______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
