On Mon, May 18, 2009 at 11:08 AM, Melcon Moraes <[email protected]> wrote: > I would recomment the following command line: tcpdump -s0 -i any -w > filename.pcap > > That way, one can load the filename.pcap onto one's Wireshark and see how it > goes. >
Thanks! I would indeed like to load it into pcap. Please send the dump using the command line above. > - > MM > > On Mon, May 18, 2009 at 10:20 AM, [email protected] <[email protected]> > wrote: >> >> Hi, >> >> i'm sorry for my very late answer. I captured some packages from the >> network about my sipx installation and package transfer. >> >> I hope that i did this right: i used this command: tcpdump -vv -i lo | >> grep asgard ... >> >> I will attach here the log from this capturing. I think the file must >> include the comunication between media relay and the rest of the >> packages. >> >> Let me know i do this wrong then i can run the right command. I will try >> also sipx installation in a separate machine to check if i will have >> their this problem. >> >> Thanks in advanced. >> Best regards, Ali Nebi! >> >> >> On Fri, 2009-05-08 at 11:13 -0400, M. Ranganathan wrote: >> > On Fri, May 8, 2009 at 10:04 AM, [email protected] <[email protected]> >> > wrote: >> > > On Thu, 2009-05-07 at 12:58 -0400, M. Ranganathan wrote: >> > >> On Thu, May 7, 2009 at 8:43 AM, [email protected] >> > >> <[email protected]> wrote: >> > >> > Hi, >> > >> > first i want to thank you for reply. >> > >> > >> > >> > I tried with this experiment, but i got the same result. >> > >> > >> > >> > I will attach sipxbridge.xml and natraversalrules.xml files from >> > >> > this >> > >> > experiment and also the error part from sipxbridge.log. >> > >> > >> > >> > I just cannot understand why this happen. >> > >> > >> > >> >> > >> >> > >> Your system appears to be misconfigured. >> > >> >> > >> 1. Your nattraversalrules has mediarelaynativeaddress : >> > >> 212.227.52.184 >> > >> >> > >> This address is publicly routable. >> > >> >> > >> If you are behind NAT then why are you putting a pulicly routable >> > >> address as your native adderss? Please put your private address >> > >> there. >> > >> If you are not behind NAT do not check the box for behind NAT. >> > >> >> > >> Your mediarelay native addresss should be your private address where >> > >> your media relay is running. >> > >> There is an http server running there for handling xml rpc requests. >> > >> Sipxbridge will send xml rpc requests there. >> > >> >> > >> >> > >> 2. What addresses does asgard.iguanait.com resolve to? Do a dig on >> > >> that and see. Perhaps you would want to set things up in a VM. >> > >> >> > >> I am afraid I dont know how else to help you further here. Something >> > >> is not resolved correctly. I strongly suspect a DNS configuration >> > >> issue. Run wireshark and see where the XML RPC request from >> > >> sipxbridge >> > >> is realy going. >> > >> >> > >> >> > >> Ranga >> > > >> > > Hi, >> > > >> > > is it possible the problem to come from provider dhcp configurations? >> > > >> > > when i Configuration tests, all tests to hostname included are with >> > > status "success", but the rest of tests "DHCP Test, DHCP (Option 120 >> > > Test), DNS Test, NTP Test, TFTP Test, FTP Test and HTTP Test) return >> > > this message: >> > > >> > > Missing mandatory DHCP configuration parameters. >> > > The DHCP server responded with an IP address assignment but did not >> > > include one of the mandatory network configuration parameters. Please >> > > see the test log for further details. >> > > * Hide details >> > > Starting DHCP server test. >> > > Sending DHCPDISCOVER request. >> > > Multiple responses. Server: 87.106.240.250 >> > > Multiple responses. Server: 87.106.240.249 >> > > DHCPOFFER responce received. >> > > Message Type: DHCPOFFER >> > > Server Identifier: 10.0.0.1 >> > > Lease Time: 360 >> > > Subnet Mask: 255.128.0.0 >> > > DNS Server: 10.0.0.1 >> > > Domain Name: test >> > > >> > > Sending DHCPREQUEST for: 10.0.248.217 >> > > Multiple responses. Server: 87.106.240.249 >> > > Multiple responses. Server: 87.106.240.250 >> > > DHCPACK responce received. >> > > Message Type: DHCPACK >> > > Server Identifier: 10.0.0.1 >> > > Lease Time: 360 >> > > Subnet Mask: 255.128.0.0 >> > > Domain Name: test >> > > DNS Server: 10.0.0.1 >> > > Missing ROUTER option from DHCPACK. >> > > Missing NTP SERVER option from DHCPACK. >> > > Missing TFTP SERVER option from DHCPACK. >> > > >> > > All of them are in state "warning". Is it possible this >> > > misconfiguration to be the problem for sipxbridge? >> > > >> > >> > I do not believe this to be the cause of the issue you are seeing. It >> > would be worthwhile to run wireshark on the machine to make sure that >> > the SSL handshake is actually happening between sipxbridge and >> > sipxrelay and not some other host. I have never seen this error happen >> > so I dont know what to make of it. >> > >> > Once this has been verified, please send me the wireshark capture of >> > the handshake that is failing. Perhaps I can see something there. >> > >> > >> > Thanks >> > >> > Ranga >> > > >> > > >> > > >> > >> > >> > >> >> _______________________________________________ >> sipx-dev mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-dev >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev > > -- M. Ranganathan _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
