On Mon, 2010-01-25 at 14:25 -0600, Eric Varsanyi wrote: > > > - If the called user has voicemail permission added REJECT stops > the phone (650) ringing but the caller on the FXO side is not > connected to voice mail until the 'ring no answer' timeout which is > defaulted. On 4.0.4 with the 3.1.3 firmware on this phone pressing > REJECT sent the call immediately to voice mail (which seems better). > At least I can look at a trace where it went to voicemail on its own > and try to figure out all this is supposed to work with the > Autoattendant code now. > > - If the called user is "shared" no REJECT button shows up at all > (instead the 3.2.2 firmware puts up 'answer', 'silence', and 'new > call'). Silence acts like 'REJECT' on the non-shared user, the calling > user on the FXO gets no change in audio signalling and waits for the > no-answer timeout then falls into voice mail.
Actually, I like the behavior that you describe for the 3.2 phone firmware better - this is how the old Pingtel phones behaved. It has the nice quality for me as a call 'rejector' that the caller can't distinguish between falling back to voicemail because I was really not there and falling back because I rejected the call: the timing is the same. _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
