The most current version of sip displayed on the Nortel customer support website is 2.2 for SIP. They show 3.4 for Unistem, but nothing higher for SIP.
Will that version be bundled in the future release of sipXecs 4.2? From: albdam [mailto:[email protected]] Sent: Thursday, February 11, 2010 12:02 PM To: Todd Hodgen Cc: [email protected] Subject: Re: [sipX-dev] Nortel 1140e Phones - short a few lines That is expected for that version of F/W. Its either 3.0 or 3.2 that supports multiline On Thu, Feb 11, 2010 at 2:45 PM, Todd Hodgen <[email protected]> wrote: I've updated a Nortel 1140e phone from Unistem to the SIP stack, running SIP-2.2-1140E as the device files in sipXecs 4.1.xxxx. The phone appears to only support one line, or at least that is what the line indicates under the configuration screen for the phone - "Maximum Supported Lines: 1" Is that an expected result for this phone, as it is a six line phone as advertised? Or a bug that needs to be written up? I may not be running the minimum version required for sipXecs, not sure exactly what version is required for this model for sipXecs 4.1.xxxx or beyond. _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
