Some time back developers were working on SIP verison 3.0 for 1140E set with multi line support. I am not sure whether 3.0 has GAed or not.
Regards Goutham B G ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hodgen Sent: Thursday, February 25, 2010 1:42 PM To: 'Todd Hodgen'; [email protected] Cc: [email protected] Subject: Re: [sipX-dev] Nortel 1140e Phones - short a few lines Just looked at the SCS playbook, and they list the 1140e as a supported phone. Has that changed maybe? I would like to confirm if from a development standpoint it is what it is - a 1 line phone, or if there needs to be a JIRA raised to include the firmware to support more lines if it is in fact possible and the firmware is available somewhere. From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hodgen Sent: Thursday, February 25, 2010 12:05 AM To: [email protected] Cc: [email protected] Subject: Re: [sipX-dev] Nortel 1140e Phones - short a few lines Not having any luck finding anything higher than 2.2. Can someone confirm that they have actually seen more than one line supported and the version the firmware they are using for it? From: [email protected] [mailto:[email protected]] Sent: Thursday, February 11, 2010 2:06 PM To: Todd Hodgen Cc: [email protected] Subject: RE: [sipX-dev] Nortel 1140e Phones - short a few lines No.... We don't even support that phone in the commercial product... ________________________________ Todd Hodgen wrote: The most current version of sip displayed on the Nortel customer support website is 2.2 for SIP. They show 3.4 for Unistem, but nothing higher for SIP. Will that version be bundled in the future release of sipXecs 4.2? From: albdam [mailto:[email protected]] Sent: Thursday, February 11, 2010 12:02 PM To: Todd Hodgen Cc: [email protected] Subject: Re: [sipX-dev] Nortel 1140e Phones - short a few lines That is expected for that version of F/W. Its either 3.0 or 3.2 that supports multiline On Thu, Feb 11, 2010 at 2:45 PM, Todd Hodgen <[email protected]> wrote: I've updated a Nortel 1140e phone from Unistem to the SIP stack, running SIP-2.2-1140E as the device files in sipXecs 4.1.xxxx. The phone appears to only support one line, or at least that is what the line indicates under the configuration screen for the phone - "Maximum Supported Lines: 1" Is that an expected result for this phone, as it is a six line phone as advertised? Or a bug that needs to be written up? I may not be running the minimum version required for sipXecs, not sure exactly what version is required for this model for sipXecs 4.1.xxxx or beyond. _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
