Saint, David (David) wrote: Hi All
While configuring Mediant ( with firmware version -6.0) , under advanced parameters section there was a parameter called 'Accepted IP Addresses' in older firmware versions and with new f/w 6.0 its been removed from that place. Please let us know where exactly the entry corresponding to that should be made in config ui . Thanks, Madhu. Hi Madhu, In the 6.0 f/w the 'Accepted IP Addresses' are replaced with the proxy addresses in 'PSTN to IP Call Routing', but please let me know if you have a requirement to add additional accepted addresses. Dave. With the 5.6 plugin of config ui using "Accepted IP Addresses" available, it was possible to specify that Accepted IP Addresses = sut1.qantom.int sut2.qantom.int. With this setting it was possible to selectively route the calls using dialplans in sut1 and sut2. Now is there a way to accomplish the same using 6.0 plugin of AC. If not, IMHO Accepted IP Addresses should be added.. Thank you , Naveen
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
