Hi Laurentiu,
In LDAP page / Configuration tab LDAP configured is
enabled.Please check the Screen Shot attached.
Still the Problem persist
Rgrds
Venkateshwaran T
Laurentiu Ceausescu wrote:
> On Thu, Feb 24, 2011 at 11:17 AM, Kumaran
> <thiru.venkateshwa...@ttplservices.com
> <mailto:thiru.venkateshwa...@ttplservices.com>> wrote:
>
> Hi Laurentiu,
> 1.In Ldap the Pin Attribute is set to userPassword
>
>
> This is correct
>
>
> 2. In LDAP contact userPassword is set to 1234 for user
> 123,130,131
> So again i when I trying enter 123 user portal as follows
> User Id = 123
> Password = 1234(Password)
>
>
> In LDAP page / Configuration tab, 'LDAP configured' should be checked
> ("*When unconfigured, the LDAP authentication will not be verified for
> user portal or Openfire*")
>
>
>
> ----- Failed(User ID and PIN combination is not valid.
> Please try again)
> User Id = 200(add through config UI and not imported
> from LDAP)
> Password = 1234(Password)
>
>
> You chose Authentication Options: LDAP only ... "meaning that only
> LDAP authentication is verified (Credentials entered in the login form
> will be interpreted only as LDAP user/password combination and
> verified against configured LDAP server for the system)"
> (see http://wiki.sipfoundry.org/display/sipXecs/LDAP+Integration)
>
>
> ----- Failed(User ID and PIN combination is not valid. Please
> try again)
> So above setting is correct or any
> otherway to set LDAP password because in Ldap mapping only Pin
> Attribute is present in config Ui
>
> Note:
> user 200 (add through config UI and not imported from
> LDAP) also cannot Login to user portal if LDAP authentication is
> selected
>
> Rgrds
> Venkateshwaran T
> Laurentiu Ceausescu wrote:
>
>
>
> On Thu, Feb 24, 2011 at 9:44 AM, Kumaran
> <thiru.venkateshwa...@ttplservices.com
> <mailto:thiru.venkateshwa...@ttplservices.com>
> <mailto:thiru.venkateshwa...@ttplservices.com
> <mailto:thiru.venkateshwa...@ttplservices.com>>> wrote:
>
> Kumaran wrote:
> > Hi All,
> > 1.Installed a LDAP server with slappasswd as -12345
> > 2. Contact was added to it .In Config Ui LDAP
> access through
> > User -- cn=Manager,dc=ttplservices,dc=com and password is
> 12345.Then I
> > select Authentication Options as - LDAP only and then I
> imported the
> > user to ConfigUI from LDAP.
> >
> > My query is
> >
> >
> Hi All,
> I apologize for my previous mail for not sending clearly
>
> Steps I followed
> 1. Installed a LDAP server with slappasswd as
> -12345(which is
> encrypted to {SSHA}Y48pn3qphmnfpZKDsk844EcP91lQ8gIp)
> 2. Contact was added to it
> 3. In Config Ui LDAP access through
> User -- cn=Manager,dc=ttplservices,dc=com
> and password
> is 12345
> 4. Then I select Authentication Options as - LDAP only
> 5.Then I imported the user to ConfigUI from
> LDAP.The users are
> 123,130,131.
>
> My query is
> 1.When I trying enter 123 user portal as follows
> User Id = 123
> Password = 12345(Ldap Password)
> ----- Failed(User ID and PIN combination is not
> valid. Please
> try again)
> User Id = 123
> Password
> ={SSHA}Y48pn3qphmnfpZKDsk844EcP91lQ8gIp(Ldap
> encrypted Password)
> ----- Failed(User ID and PIN combination is not
> valid. Please
> try again)
>
>
> You should try with LDAP user password (LDAP passwd for
> 123,130,131 ) and not with LDAP admin password.
>
> Observation:
> Same thing as mentioned above is seen for all user in
> ConfigUI
> ,including the user which are not imported from LDAP
>
> So cannot login to user portal if LDAP only authentication is
> selected.So Please Guide us whether it is setting problem or a
> issue in
> SipXecs
>
> Rgrds
> Venkateshwaran T
>
>
>
>
_______________________________________________
sipx-dev mailing list
sipx-dev@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
