Yes.200 is SRTP enabled phone and 201 is STRP disabled phone..So if I call either way there will no SRTP part.If I call 100 from 200 means SRTP part will be present..
Joegen Baclor wrote: > So you are saying Offer SRTP doesn not mean what it says? Phones do > not offer SRTP with this set? > > On 06/16/2011 04:57 PM, Kumaran wrote: >> Hi Joegen, >> Just now found out,if Require SRTP is disabled,Both the scenario is >> working but the call will not contain SRTP part...either way from 200 >> or 201 >> >> Regards, >> Kumaran T >> >> >> Joegen Baclor wrote: >>> If you set on Offer SRTP and not Require SRTP, does scenario 1 and 3 >>> work? >>> >>> On 06/16/2011 02:23 PM, Kumaran wrote: >>>> Hi All, >>>> I'm testing SRTP for 4.4 in the 13th June build.George had >>>> attached a new Polycom file " phone.xml and phone.properties in Jira >>>> (XX-9675)<http://track.sipfoundry.org/browse/XX-9675>which I have >>>> replaced these files in /etc/sipxpbx/polycom..After replacing I >>>> enabled the following option Enable SRTP >>>> Offer SRTP >>>> Require SRTP >>>> AES_CM_128_HMAC_SHA1_32 for phones to enable SRTP function..Then >>>> after enabling STRP in one phone I'm finding 2 different >>>> scenario(1&3).... >>>> >>>> Scenario: >>>> 2 users 200 and 201 >>>> 200=Polycom 550 =0004f21ed193 >>>> 201=Polycom 550= 0004f21ebe81 >>>> I tested in following Order.So I if any trying maintain the same order >>>> Scenario:1 1.200 user -Polycom 550 -SRTP Enabled >>>> 2.201 user -Polycom 550 -No SRTP Enabled >>>> 3.Call 201 from 200 --Call is going to user 201.SRTP is working >>>> Fine...Lock symbol is present in both the phone and >>>> AES_CM_128_HMAC_SHA1_32 line is present in the SDP part >>>> 4.Call 200 from 201----Call going to IVR(Owner of the EXT 200 is >>>> not available) >>>> Scenario:2 >>>> 1.200 user -Polycom 550-SRTP Enabled >>>> 2.201 user -Polycom 550-SRTP Enabled >>>> 3.Call 201 from 200 --Call is going to user 201.SRTP is working >>>> Fine...Lock symbol is present in both the phone and >>>> AES_CM_128_HMAC_SHA1_32 line is present in the SDP part >>>> 4.Call 200 from 201--Call is going to user 200.SRTP is working >>>> Fine...Lock symbol is present in both the phone and >>>> AES_CM_128_HMAC_SHA1_32 line is present in the SDP part >>>> Scenario:3 >>>> 1.200 user -Polycom 550 -SRTP Enabled >>>> 2.201 user -Polycom 550 -No SRTP Enabled >>>> 3.Call either way from 200 to 201 or 201 to 200 ---Call is going >>>> to IVR. >>>> >>>> I had attached MAC-sipx-sip.cfg for above three scenario.There is >>>> difference in MAC-sipx-sip.cfg for first and third scenario for 201 >>>> user phone(which having same setting for both the scenario)in SRTP >>>> part.The same behavior is seen to other user also if we try in above >>>> order... >>>> >>>> Regards, >>>> Venkateshwaran T >>>> >>>> >>>> _______________________________________________ >>>> sipx-dev mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> sipx-dev mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >> _______________________________________________ >> sipx-dev mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >> _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
