We are working on a local and remote NAT traversal feature that will be
part of the sipXecs 4.0 baseline. That feature will address the problem
being described here. Some aspects of the feature are based on the
sipXbridge but is being offered as a general solution that will also
work for non-SIP trunk calls.
Stay tuned.
Cheers,
bob
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Picher,
Michael
Sent: Friday, May 30, 2008 1:25 PM
To: VG; [email protected]
Subject: Re: [sipx-users] Remote Registration in Sipx
You need something to do NAT traversal for the far end phones...
See the section on how to traverse firewalls at
http://sipx-wiki.calivia.com/index.php/SipX_HOWTO_Library
The best option in a released form at this point is an Ingate
Siparator (www.ingate.com) with the far-end NAT traversal option,
OpenSBC (www.opensipstack.org) or go beta with the 3.11.x code and test
sipxBridge (although that might only be for sip trunking at this
point... not sure).
Mike
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of VG
Sent: Friday, May 30, 2008 10:42 AM
To: [email protected]
Subject: [sipx-users] Remote Registration in Sipx
Hello All,
I am stuck somewhere.
I have Sipx3.10 installed on Local Network.
Now I like to register some phones from outside world.
This is the exact scenario's
How can I achieve that.
How could overcome this problem.
Do I have to Configure any setting on Sipx
Regard,
Vikas Gupta
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
