I do this with a custom dialplan. It depends on whether you want the dialing to be "native" or "prefixed". This is based ona 3 digit dialplan.
Site 1 - Extensions 200-299 Site 2 - Extensions 300-399 Create a gateway with the IP of site 2's IP address. Create a rule at site 1, CUSTOM, prefix 3 and 2 digits. Resulting call entire dialed number, use gateway just created. Do the same thing at site 2, prefix 2 and 3 digits. Similarly you can create a rule to prefix "8" so you can transfer to VM on the other system, etc. IF both sites are in the same range (200-299) then it's pretty simple to make the user dial a prefix like "4" in the dial rule and send just the 3 digits (dialed number prefix is 7 and 3 digits, resulting call is and append matched suffix, etc., so 7200 transfers to voice mail on the opposite system). >>> VG <[EMAIL PROTECTED]> 06/18/08 07:34 AM >>> Hi all, Please specify the Detail to interconnect two sipx server. Regards, Vikas _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
