Will not work with NAT between the two sites (unless it is a one to one NAT without firewalling).
Mike From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of VG Sent: Wednesday, June 18, 2008 8:15 AM To: Tony Graziano Cc: [email protected] Subject: Re: [sipx-users] how to interconnect two sipx server. Thanks, Still I m bit confused. If I configure dial plan than it means My sipx site 2 should be on the static ip address. Will it work fine if Nat is in b/w the 2 Sites. Should i Have to specify 5060 port in gatway registration. Regards, Vikas On Wed, Jun 18, 2008 at 5:18 PM, Tony Graziano <[EMAIL PROTECTED]> wrote: I do this with a custom dialplan. It depends on whether you want the dialing to be "native" or "prefixed". This is based ona 3 digit dialplan. Site 1 - Extensions 200-299 Site 2 - Extensions 300-399 Create a gateway with the IP of site 2's IP address. Create a rule at site 1, CUSTOM, prefix 3 and 2 digits. Resulting call entire dialed number, use gateway just created. Do the same thing at site 2, prefix 2 and 3 digits. Similarly you can create a rule to prefix "8" so you can transfer to VM on the other system, etc. IF both sites are in the same range (200-299) then it's pretty simple to make the user dial a prefix like "4" in the dial rule and send just the 3 digits (dialed number prefix is 7 and 3 digits, resulting call is and append matched suffix, etc., so 7200 transfers to voice mail on the opposite system). >>> VG <[EMAIL PROTECTED]> 06/18/08 07:34 AM >>> Hi all, Please specify the Detail to interconnect two sipx server. Regards, Vikas
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
